Installation
Adjusting the Projected Image
NOTE: The projector is equipped with an “elevator foot” for adjusting the projector height.
To raise the projector
1.Lift the projector up and press the elevator button. The elevator foot pops out.
2.Press the elevator button and hold it in while raising the projector to the display angle you want, then release the elevator button to lock the elevator foot in position.
3.Rotate the tilt adjust wheel to
Elevator Button
Tilt Adjust Wheel | Elevator Foot |
To lower the projector
1.Hold the projector with one hand, then press and hold down the elevator button.
2.Lower the projector, then release the elevator button to lock the elevator foot in position.
3.Rotate the tilt adjust wheel to
NOTE: When placing the projector in its carrying case, please first retract the elevator foot and tilt adjust wheel to avoid breakage.
Xerox DP1011 User’s Guide | 10 |