Visioneer DP1011 manual Projector Management, Projection Direction

Page 24

User Controls

Projector Management

1.Press the Menu button on the Remote Control or Panel Control to open the OSD.

2.Select the Management menu and press the Enter button. The Management menu appears.

3.Use the keys to select the item you want, and use the

keys to adjust the selected setting.

4.When the new settings are what you want, press the Menu button again.

Menu Location—Sets the location of the menus on the screen.

Projection Direction:

Front-Desktop—Projects onto an image in front of the projector. The factory default setting.

Rear-Desktop—Projects a reversed image so you can project from behind a translucent screen.

Front-Ceiling—Projects an image turned upside down for ceiling-mounted projection.

Rear-Ceiling—Projects a reversed image turned upside down for ceiling-mounted projection from behind a translucent screen.

Lamp Hour—Displays the lamp’s elapsed operating time (in hours).

Reset Lamp Hours—Resets the lamp’s elapsed operating time. Reset this option only after installing a new lamp.

Reset This Menu—Resets the projector’s display settings to their original factory settings. Select Yes to reset the menu.

Machine Reset—Resets the projector’s settings (except Lamp Hours) on all menus to their original factory settings. Select Yes to reset all menus.

Xerox DP1011 User’s Guide

19

Image 24
Contents Xerox DP1011 Projector Page FCC Radio Frequency Interference Statement Table of Contents Welcome Precautions Do’s and Don’ts Don’tWhat’s in the Box Xerox DP1011 Projector Connection Ports Installation Connecting the ProjectorPowering On/Off the Projector To turn on the projector powerTo turn off the projector power Adjusting the Projected Image To raise the projectorTo lower the projector Adjusting the Projector Zoom/Focus Adjusting Projection Image SizePanel Control and Remote Control User ControlsPanel Control Remote Control On-Screen Display OSD Menus Displaying Menus and Selecting ItemsChoose a Language Adjust the Projector Image Adjust the Computer Image Adjust the Video Image Projector Management Projection DirectionAdjust the PiP Picture in Picture Maintenance Changing the LampTo change the lamp module To replace the lamp module, reverse the previous steps Troubleshooting Problem No image appears on the screenIf you are using an Apple PowerBook Problem The image is flickering or otherwise unstable Problem Image has vertical flickering barProblem Image is our of focus Problem The screen is outstretched when displaying 169 DVDProblem Image is reversed Problem Lamp burns out or make a popping soundXerox DP1011 Projector Specifications Input/Output ConnectorsSetting the Screen Resolution If you have a Windows PCIf you have an Apple Macintosh Resolution Analog Compatibility Modes-Windows ComputersResolution Analog Compatibility Modes-Macintosh Computers05-0600-000