Visioneer DP1011 manual Installation, Connecting the Projector

Page 12

Installation

Installation

Connecting the Projector

VGA Cable

Power Cord

Video Output

Composite Video Cable

S-Video Cable

S-Video Output

1.Make sure the projector and computer are turned off.

2.Connect one end of the VGA cable to the projector. Connect the other end to the VGA port on the computer.

3.Connect the projector to the other video source(s) with the appropriate cable(s).

4.Plug the power cord into the back of the projector and then into an electrical outlet.

5.Turn on the projector first, and then the computer.

NOTE: Your DP1011 projector works best at computer screen resolutions of 1024 x 768 or less. To reset the computer screen resolution, see “Setting the Screen Resolution” on page 28.

Xerox DP1011 User’s Guide

7

Image 12
Contents Xerox DP1011 Projector Page FCC Radio Frequency Interference Statement Table of Contents Welcome Precautions Do’s and Don’ts Don’tWhat’s in the Box Xerox DP1011 Projector Connection Ports Installation Connecting the ProjectorPowering On/Off the Projector To turn on the projector powerTo turn off the projector power Adjusting the Projected Image To raise the projectorTo lower the projector Adjusting the Projector Zoom/Focus Adjusting Projection Image SizePanel Control and Remote Control User ControlsPanel Control Remote Control On-Screen Display OSD Menus Displaying Menus and Selecting ItemsChoose a Language Adjust the Projector Image Adjust the Computer Image Adjust the Video Image Projector Management Projection DirectionAdjust the PiP Picture in Picture Maintenance Changing the LampTo change the lamp module To replace the lamp module, reverse the previous steps Troubleshooting Problem No image appears on the screenIf you are using an Apple PowerBook Problem The image is flickering or otherwise unstable Problem Image has vertical flickering barProblem Image is our of focus Problem The screen is outstretched when displaying 169 DVDProblem Image is reversed Problem Lamp burns out or make a popping soundXerox DP1011 Projector Specifications Input/Output ConnectorsSetting the Screen Resolution If you have a Windows PCIf you have an Apple Macintosh Resolution Analog Compatibility Modes-Windows ComputersResolution Analog Compatibility Modes-Macintosh Computers05-0600-000