Visioneer DP1011 manual User Controls, Panel Control and Remote Control

Page 17

User Controls

User Controls

Panel Control and Remote Control

The buttons on the Panel Control and the Remote Control are for controlling the projector’s functions.

Panel Control

Power/Standby Warning

Indicator Indicator

Directional Select Keys

Power/Standby Indicator—Flashes green during power startup; remains steady green when projector is ready.

Warning Indicator—Turns red when projector is overheated, flashes red when the projector has a lamp problem or internal problem, flashes orange when high-speed cooling is in progress.

Power—Turns projector power on and off. See “Powering On/Off the Projector” on page 8 for the specific power on/off sequences.

Source—Selects type of video source: RGB, Component-p, Component-i, S-Video, Composite Video, or HDTV.

Enter—When menus are displayed, confirms your selection of items on the menus.

Directional Select Keys ( )—When menus are displayed, selects items or adjusts settings of items.

Keystone—Adjusts image distortion caused by tilting the projector (+/- 16 degrees).

Menu—Opens the On-Screen Display (OSD) menus. To close the OSD, press the Menu button again.

Xerox DP1011 User’s Guide

12

Image 17
Contents Xerox DP1011 Projector Page FCC Radio Frequency Interference Statement Table of Contents Welcome Precautions Don’t Do’s and Don’tsWhat’s in the Box Xerox DP1011 Projector Connection Ports Connecting the Projector InstallationTo turn on the projector power Powering On/Off the ProjectorTo turn off the projector power To lower the projector Adjusting the Projected ImageTo raise the projector Adjusting Projection Image Size Adjusting the Projector Zoom/FocusPanel Control Panel Control and Remote ControlUser Controls Remote Control Displaying Menus and Selecting Items On-Screen Display OSD MenusChoose a Language Adjust the Projector Image Adjust the Computer Image Adjust the Video Image Projection Direction Projector ManagementAdjust the PiP Picture in Picture To change the lamp module MaintenanceChanging the Lamp To replace the lamp module, reverse the previous steps Problem No image appears on the screen TroubleshootingIf you are using an Apple PowerBook Problem Image has vertical flickering bar Problem The image is flickering or otherwise unstableProblem Image is our of focus Problem The screen is outstretched when displaying 169 DVDProblem Lamp burns out or make a popping sound Problem Image is reversedInput/Output Connectors Xerox DP1011 Projector SpecificationsIf you have an Apple Macintosh Setting the Screen ResolutionIf you have a Windows PC Compatibility Modes-Windows Computers Resolution AnalogCompatibility Modes-Macintosh Computers Resolution Analog05-0600-000