Visioneer DP1011 manual Choose a Language

Page 20

User Controls

Choose a Language

1.Press the Menu button on the Remote Control or Panel Control to open the OSD.

2.Select the Language menu and press the Enter button. The Language menu appears.

3.Use the keys to select the language you want.

The Panel Control only has a key. Use it to select from the menu.

4.Press the Menu button again.

The menus will be displayed in the selected language.

Xerox DP1011 User’s Guide

15

Image 20

Contents Xerox DP1011 Projector Page FCC Radio Frequency Interference Statement Table of Contents Welcome Precautions Do’s and Don’ts Don’tWhat’s in the Box Xerox DP1011 Projector Connection Ports Installation Connecting the ProjectorPowering On/Off the Projector To turn on the projector powerTo turn off the projector power To lower the projector Adjusting the Projected ImageTo raise the projector Adjusting the Projector Zoom/Focus Adjusting Projection Image SizePanel Control Panel Control and Remote ControlUser Controls Remote Control On-Screen Display OSD Menus Displaying Menus and Selecting ItemsChoose a Language Adjust the Projector Image Adjust the Computer Image Adjust the Video Image Projector Management Projection DirectionAdjust the PiP Picture in Picture To change the lamp module MaintenanceChanging the Lamp To replace the lamp module, reverse the previous steps Troubleshooting Problem No image appears on the screenIf you are using an Apple PowerBook Problem The image is flickering or otherwise unstable Problem Image has vertical flickering barProblem Image is our of focus Problem The screen is outstretched when displaying 169 DVDProblem Image is reversed Problem Lamp burns out or make a popping soundXerox DP1011 Projector Specifications Input/Output ConnectorsIf you have an Apple Macintosh Setting the Screen ResolutionIf you have a Windows PC Resolution Analog Compatibility Modes-Windows ComputersResolution Analog Compatibility Modes-Macintosh Computers05-0600-000