UPS Display: Network Configuration Screens
Remote Monitoring Service Settings screen
Network settings must be configured before the remote monitoring feature can be used.
Note
The APC Remote Monitoring Service (RMS) is an APC professional service which securely monitors customer’s power systems and surrounding environment from a remote 24×7 operation center, responding to events according to a
Normal
Network Configuration
5.39 PM
Remote Monitoring Service Settings
Enable APC RMS
Use proxy
Proxy server address
Proxy server port
Use authentication
Proxy server login Proxy server password
xxxx
Page 4 of 5
•Enable APC RMS: Select this checkbox to start using the service. Once selected, information about your UPS will periodically be sent to APC’s Remote Monitoring Service.
The APC Remote Monitoring Service uses HTTP protocol to post information to its database. If a proxy server is used as Internet connection method, then the required proxy server port settings must be specified (a proxy server acts as an agent between a workstation user or other networked device and the Internet so that the security, administrative control and caching service can be regulated).
•Use Proxy: Select this checkbox if the Internet connection method uses a HTTP proxy server to connect to the Internet.
•Proxy server address: Enter the fully qualified IP address or fully qualified domain name of the proxy server. If you do not know the server address or port number, contact your network administrator.
•Proxy server port: Enter the port number of the proxy server.
•Use authentication: Select this checkbox if the proxy server requires a login. Then specify a Proxy server login (user name) and a Proxy server password.
18 | Symmetra® MW with Internal Bypass Static Switch - User Guide - |