Overview & General Specifications
Rear View
The enclosure’s appearance, as viewed from the rear, (FIG. 2) will vary depending on the configuration.
CPU/Control hardware
Serial number
Input connectorsOutput connectors
Power receptacle
FIG. 2 Precis SD 12x8 enclosure rear view
Rear View Components
CPU/Control hardware
Power receptacle and specifications
Serial number
Input/output connectors
The following sections briefly introduce the hardware on the rear of an enclosure.
CPU/Control Hardware
The CPU is to the left of the input connectors on the rear of the enclosure (FIG. 3).
System Status indicator – Blinks either green or red to indicate system status.
REMOTE Port – XNNet communication link port for linking to AMX AutoPatch control devices (e.g., remote control panels and SBCs).
CONTROL port – Serial port 
external control device.
ENC LINK Port – Ethernet
Can be used to link enclosures.
FIG. 3 CPU/Control hardware
Although primarily designed as a
Note: The Comm light on the front panel indicates Ethernet traffic on the system.
Precis SD Instruction Manual | 9 |
|
|