Allied Telesis AT-8500 Series manual Tables

Page 9

Tables

Table 1. Safety Symbols

12

Table 2.

Model Configurations

16

Table 3.

IEEE 802.3af Class vs. Power Levels

28

Table 4. LEDs for the 10/100Base-TX Twisted Pair Ports on the AT-8524M,AT-8550GB, and AT-8550SP Switches

31

Table 5. LEDs for Ports 49R and 50R on the AT-8550GB and AT-8550SP Switches

32

Table 6. LEDs for the 10/100Base-TX Twisted Pair Ports on the AT-8524POE Switch

33

Table 7.

LEDs for the Fiber Optic Ports on the AT-8516F/SC Switch

35

Table 8. LEDs for the Optional GBIC and SFP Ports on an AT-8550GB and AT-8550SP Switches

35

Table 9. System LEDs

36

Table 10.

Twisted Pair Cabling and Distances

52

Table 11.

Fiber Optic Cabling and Distances

53

Table 12. 10/100Base-TX Port MDI/MDI-X Pin Signals

83

Table 13. 10/100Base-T Port MDI/MDI-X Pin Signals with PoE

83

Table 14. MDI and MDI-X Pin Signals (1000Base-T)

84

Table 15.

RS-232 Terminal Port Pin Signals

86

Table 16.

Pin Definitions of the 16-pin RPS Connector

87

Table 17.

Pin Definitions for the RPS Connector on the AT-8524POE Switch

88

9

Image 9
Contents Installation Guide Page Electrical Safety and Emissions Standards Translated Safety Statements Contents Page Figures Figures Tables Tables Preface Symbol Meaning Description Safety Symbols Used in this DocumentWhere to Find Web-based Guides Contacting Allied Telesis Management Software UpdatesChapter OverviewModel Configuration Model ConfigurationsPort LEDs System LEDs Model DescriptionsShows the front and back panels of the AT-8524M switch Shows the front and back panels of the AT-8524POE switch Shows the front and back panels of the AT-8550GB switch AT-8550SP Switch Front and Back Panels 10/100Base-TX Twisted Pair Ports Port DescriptionsMaximum Distance 10/100/ 1000Base-T Twisted Pair Ports 100Base-FX Fiber Optic Ports Type of Cable Power Over Ethernet Minimum Power Maximum Power Class Gbic Module Gbic and SFP SlotsModule Expansion Slots Twisted Pair Port LEDs LED Mode Select Button LEDsState Description Mode FDX OFF Indicates that the port is operating at 10 or Fiber Optic Port LEDs Gbic and SFP Expansion Slot LEDs Maste RS-232 Terminal Port Power Options and Connectors AC Power Connector DC Power Connector MAC Address Table Duplex Mode Few Basics about Ethernet SwitchingBack Pressure and Flow Control Store ForwardOverview Power Workgroup Topology Network TopologiesCollapsed Backbone Topology Mixed Topology Mixed Topology Overview Installation Reviewing Safety Precautions Page Installation Selecting a Site for the Switch Planning the Installation MaximumModel Speed Cable Type Maximum Unpacking the Switch Installing the Switch in a Rack Installation Page Removing the Expansion Slot Faceplate Installing an Optional Expansion or Stacking ModuleAT-A46 Installing an Optional Gbic Ferrules of the optical connector Bore Installing an Optional SFP Transceiver Page Cabling Twisted Pair Ports Cabling the SwitchCabling Fiber Optic Ports SC Port Transmitter Fiber Connector Cabling Expansion Modules Powering on an AC Powered Switch Page Positive, Ground, and Negative Terminals Wiring and Powering on an DC Powered Unit8mm ±1mm 31in. ±0.039in Installation Starting a Local Management Session Installation Warranty Registration Installation Twisted Pair Port Link LED is Off PWR LED is OffFiber Optic Port Link LED is Off Fault LED is On Continuously PoE Device is Not Receiving PowerCannot Establish a Local Management Session Physical Specifications Environmental SpecificationsAppendix a Safety and Electromagnetic Emissions Certifications Power SpecificationsSignal Pin MDI SignalPin MDI Signal MDI-X Signal RJ-45 Twisted Pair Port PinoutsUnused RX- and Vport-2 TX- and Vport-2 MDI Configuration MDI-X Configuration Pinout PairAT-8516F/SC Fiber Optic Port Specifications RS-232 Terminal Port Pinouts Pin SignalPin Definition RPS Connector Port PinoutsPin 3V RS13 3.3V RS+ Dual SC Type Connector