Accton Technology 4508, CheetahSwitch Workgroup manual Management Guide, IP Configuration

Page 19

Management Guide

IP Configuration

Use the IP Configuration screen to set the bootup option, or configure the switch's IP parameters. The screen shown below is described in the following table.

CheetahSwitch Workgroup - 4508

Network Configuration: IP Configuration

Interface Type : Ethernet

 

IP Address

: 10.1.113.29

 

Subnet Mask

: 255.255.0.0

 

Gateway IP

: 10.1.0.254

 

IP State

: USER-CONFIG

 

<APPLY>

<OK>

<CANCEL>

Use <TAB> or arrow keys to move. other keys to make changes.

Parameter

Description

Interface Type

Indicates IP over Ethernet.

 

 

IP Address1

IP address of the switch you are managing when accessing the SNMP agent over

 

the network. The management agent supports SNMP over UDP/IP transport

 

protocol. In this environment, all systems on the Internet, such as network

 

interconnection devices and any PC accessing the agent (or running AccView) are

 

assigned an IP address.

 

Valid IP addresses consist of four numbers, of 0 to 255, separated by periods.

 

Anything outside of this format will not be accepted by the configuration program.

 

 

Subnet Mask1

Subnet mask of the SNMP agent. This mask identifies the host address bits used

 

for routing to specific subnets.

 

 

Default Gateway1

Gateway used to pass trap messages from the switch’s agent to the management

 

station. Note that the gateway must be defined if the management station is

 

located in a different IP segment.

 

 

IP State

Specifies whether IP functionality is enabled via manual configuration, or set by

 

Boot Protocol (BOOTP). Options include:

 

USER-CONFIG - IP functionality is enabled based on the default or user specified

 

IP Configuration. (This is the default setting.)

BOOTP Get IP - IP is enabled but will not function until a BOOTP reply has been received. BOOTP requests will be periodically broadcast by the switch in an effort to learn its IP address.

1: The default value is null.

2-7

Page 18 Page 20
Image 19
Page 18 Page 20
Contents CheetahSwitch Workgroup-4508 Management Guide CheetaSwitch Workgroup-4508 RMA International Headquarters USA HeadquartersPage Contents Using the Web Agent Iii Appendix a TroubleshootingAdvanced Topics Appendix B Pin AssignmentsPage Configuration Options Managing the SwitchModem Connection Making Connections for System ConfigurationCheetahSwitch Workgroup-4508 Onsite ConnectionIn-Band Network Connection Management Guide Telnet ConnectionCheetahSwitch Workgroup-4508 Using the System Configuration Program Parameter Description Main MenuParameter Description Management GuideDisplaying System Information System Information MenuManagement Guide Displaying Version Information Management Setup MenuChanging the Network Configuration IP Configuration IP Connectivity Test Ping Access Host ConfigurationHttp Configuration Parameter Default Description CheetahSwitch Workgroup-4508 Configuring the Serial PortManagement Guide Assigning Snmp Parameters Configuring IP Trap Managers Configuring Community NamesConsole Login Configuration Using Tftp Protocol to Download Over the Network CheetahSwitch Workgroup-4508 Downloading System SoftwareConfiguring the Switch Enabled CheetahSwitch Workgroup-4508 Configuring Port ParametersUsing the Spanning Tree Algorithm Management Guide Viewing the Current Port ConfigurationPriority 32,768 Configuring Bridge STADisabled Configuring STA for PortsDisplaying the Current Bridge STA Displaying the Current STA for Ports Information. Port address table is cleared, and the port Igmp Multicast Filtering Management Guide Using a Mirror Port for AnalysisConfiguring Igmp Management Guide Broadcast Storm Control Refer to Network Monitor Menu / Static Unicast Address Table Port Priority Configuration Management Guide Configuring Traffic Classes802.1p Port Traffic Class Information 802.1Q Vlan Base Information Management Guide Configuring Virtual LANsMAX Vlan ID VID 802.1Q Vlan Current Table Information802.1Q Vlan Static Table Configuration Pvid 802.1Q Vlan Port ConfigurationMenu Description Monitoring the SwitchCheetahSwitch Workgroup-4508 Displaying Port Statistics Displaying Rmon Statistics Formed MAC Using the Address TableVlan ID assigned to this multicast group Multicast IP Parameter Management Guide Configuring Static Unicast AddressesVID MAC Logging Off the System Resetting the SystemPost Navigating the Web Browser Interface Using the Web AgentCheetahSwitch Workgroup-4508 Home Panel Display Console ConfigurationSTA SnmpVlan System Information Main Board Switch InformationIP Configuration Network ConfigurationCheetahSwitch Workgroup-4508 Access Host Snmp ConfigurationSnmp Administration Enable Trap Managers Management Guide Snmp CommunityWeb Upload Management Security ConfigurationFirmware Upgrade Options Change PasswordTftp Download Management Address Table Configuration Spanning Tree Spanning Tree InformationPorts Switch Parameter Default Description Management Guide Spanning Tree ConfigurationWhen the Switch Becomes Root Parameter Default Description Path Cost 100/19/4 STA Port ConfigurationBridge Capability Configuring Bridge MIB ExtensionsPort Priority Configuration Bridge SettingsPriority Port Traffic Class Information Vlan Basic Information Configuring VLANsVlan ID Management Guide Vlan Current TableVlan Static Table CheetahSwitch Workgroup-4508 Vlan Static ListVlan Static Membership by Port CheetahSwitch Workgroup-4508 Vlan Port Configuration Igmp Multicast Filtering Configuring IgmpPort Information Port MenusPort Configuration Port Statistics Port Mirroring ConfigurationEtherlike Statistics Sum of alignment errors and code errors frames received with Undersize Frames CheetahSwitch Workgroup-4508 Rmon StatisticsFCS or alignment error Broadcast Storm Control Spanning Tree Algorithm Advanced TopicsAssigning Ports to VLANs Virtual LANsPort Overlapping Management Guide Vlan ClassificationForwarding Tagged/Untagged Frames Igmp Snooping and IP Multicast Filtering Class-of-Service CoS SupportRemote Monitoring Snmp Management SoftwareCheetahSwitch Workgroup-4508 In-Band Connection Console ConnectionUpgrading Firmware via the Serial Port Loader DB9 Serial Port Pin Description Connection from Switch’s Serial Port to PC’s 9-Pin COM PortDB9 Port Pin Assignments Port Connection from Switchs Serial Port to PCs 25-Pin DTE PortSwitchs 9-Pin Ccitt Signal Modems Serial Port Pin COM Port Switchs 9-Pin Serial Null ModemES4508 E022000-R01

CheetahSwitch Workgroup, 4508 specifications

Accton Technology is a pioneering force in networking solutions, and one of its standout products is the Accton Technology 4508, commonly referred to as the CheetahSwitch Workgroup. This switch is designed to cater to the evolving demands of workgroup networking, providing an innovative blend of performance, scalability, and manageability.

The CheetahSwitch 4508 is engineered to support high-speed data transfer, making it an ideal solution for small to medium-sized enterprises. It features a robust architecture that can handle a considerable amount of network traffic, ensuring seamless communication within workgroups and across departments. With its ability to connect up to eight devices, the switch guarantees that workgroups can stay connected, productive, and efficient.

One of the main features of the CheetahSwitch 4508 is its impressive bandwidth capacity. It supports multiple Ethernet standards, including Fast Ethernet and Gigabit Ethernet, allowing for flexible deployment options. This scalability is crucial in environments where network demands can rapidly change. The switch is designed with multiple ports, offering numerous connectivity options for various devices.

Another significant characteristic of the CheetahSwitch 4508 is its advanced management capabilities. It comes equipped with user-friendly configuration tools that simplify the management process, making it easy for IT administrators to set up and monitor network performance. This feature not only enhances operational efficiency but also helps in identifying potential issues before they escalate, thereby minimizing downtime.

In terms of security, the CheetahSwitch prioritizes user protection through features like VLAN support and port security, allowing organizations to segment their networks and manage traffic flow securely. This is essential in today’s cybersecurity landscape, where threats are ever-evolving, and data protection is non-negotiable.

Moreover, energy efficiency is a hallmark of the CheetahSwitch 4508. It uses technology that optimizes power consumption, contributing to lower operating costs while being environmentally friendly. This aligns with the growing trend toward sustainable business practices.

Overall, the Accton Technology 4508 CheetahSwitch Workgroup is a reliable networking solution that delivers the performance, scalability, and management features required for today's dynamic business environment. With its commitment to high-speed connectivity and robust security measures, it stands out as an exemplary choice for organizations looking to enhance their network infrastructure.
Top Page Image Contents