CheetahSwitch Workgroup-4508
Main Menu
With the system configuration program you can define system parameters, manage the switch and all its ports, or monitor network conditions. The figure below of the Main Menu and the following table briefly describe the selections available from this program.
Note: Options for the currently selected item are displayed in the highlighted area at the bottom of the interface screen.
CheetahSwitch Workgroup - 4508
Main Menu
System Information Menu...
Management Setup Menu...
Device Control Menu...
Network Monitor Menu...
System Restart Menu...
Exit
Use <TAB> or arrow keys to move. <Enter> to select.
Parameter | Description |
System Information Menu |
|
System Information | Provides basic system description, including contact information. |
Switch Information | Shows hardware/firmware version numbers, and power status. |
Management Setup Menu |
|
Network Configuration | Includes IP setup, Ping facility, Access Host configuration, HTTP (Web |
| agent) setup, Telnet configuration, and MAC address. |
Serial Port Configuration | Sets communication parameters for the serial port, including |
| management mode, baud rate, console |
| refresh interval. |
SNMP Configuration | Enables/disables SNMP access, activates traps; and configures |
| communities and trap managers. |
Console Login Configuration | Sets user names and passwords for system access, as well as the |
| invalid password threshold and lockout time. |
TFTP Download | Downloads new version of firmware to update your system |
Device Control Menu |
|
Port Configuration | Enables any port, enables/disables flow control, and sets |
| communication mode to |