Management Guide
802.1Q VLAN Static Table Configuration
Use this screen to create a new VLAN or modify the settings for an existing VLAN. Note that all ports can only belong to one untagged VLAN. This is set to VLAN 1 by default, but can be changed via the 802.1Q VLAN Port Configuration screen.
CheetahSwitch Workgroup - 4508 | ||
1Q VLAN Static Table Configuration | ||
VID | VLAN Name | Status |
Egress Ports |
| Forbidden Egress Ports |
|
| VID : 0 |
|
| [Show] |
|
| [More] |
|
| [New] |
<APPLY> | <OK> | <CANCEL> |
Use <TAB> or arrow keys to move, other keys to make changes. | ||
|
|
|
Parameter | Description |
VID | The ID for the VLAN currently displayed. |
| Range: |
VLAN Name | A |
| String length: Up to 8 alphanumeric characters |
Status | Sets the current editing status for this VLAN as: |
| Not in Service, Destroy, or Active. |
Unit | Stack unit. |
Egress Ports | Set the entry for any port in this field to “1” to add it to the displayed |
| VLAN, or “0” to remove it from the VLAN. |
Forbidden Egress Ports | Prevents a port from being automatically added to this VLAN via |
| GVRP. Note that GVRP is not supported by this switch. |
[Show] | Displays settings for the specified VLAN. |
[More] | Displays consecutively numbered VLANs. |
[New] | Sets up the screen for configuring a new VLAN. |