Accton Technology 4508 Management Setup Menu, Management Guide Displaying Version Information

Page 17

Management Guide

Displaying Version Information

Use the Switch Information screen to display hardware/firmware version numbers, as well as the power status.

CheetahSwitch Workgroup - 4508

Switch Information
Hardware Version	:	V1.0
POST ROM Version	: V01.00.00
Firmware Version	: V01.00.01
Serial Number	:
Port Number	:	8
Internal Power Status	:
Redundant Power Status :
<OK>
Use <TAB> or arrow keys to move. <Enter> to select.

Parameter	Description
Hardware Version	Hardware version of the main board.
POST ROM Version	Power-On Self-Test version number.
Firmware Version	System firmware version in ROM.
Serial Number1	Serial number of the main board.
Port Number	Number of ports.
Internal Power Status1	Indicates if the primary power is active or inactive.
Redundant Power Status1	Indicates if the redundant power is active or inactive.

1: These parameters are not supported by the current hardware version.

Management Setup Menu

After initially logging onto the system, adjust the communication parameters for your console to ensure a reliable connection (Console Configuration menu). Specify the Ethernet and IP addresses for the SNMP agent (IP Configuration menu), and then set the Administrator and User passwords (Console Login Configuration menu). Remember to record them in a safe place. Also set the community string which controls access to the on-board SNMP agent via in-band management software (SNMP Configuration menu). The items provided by the Management Setup Menu are described in the following sections.

2-5

Image 17

Contents CheetahSwitch Workgroup-4508 Management Guide CheetaSwitch Workgroup-4508 RMA International Headquarters USA HeadquartersPage Contents Using the Web Agent Advanced Topics Appendix a TroubleshootingAppendix B Pin Assignments IiiPage Configuration Options Managing the SwitchCheetahSwitch Workgroup-4508 Making Connections for System ConfigurationOnsite Connection Modem ConnectionIn-Band Network Connection Management Guide Telnet ConnectionCheetahSwitch Workgroup-4508 Using the System Configuration Program Parameter Description Main MenuParameter Description Management GuideDisplaying System Information System Information MenuManagement Guide Displaying Version Information Management Setup MenuChanging the Network Configuration IP Configuration IP Connectivity Test Ping Access Host ConfigurationHttp Configuration Parameter Default Description CheetahSwitch Workgroup-4508 Configuring the Serial PortManagement Guide Assigning Snmp Parameters Configuring IP Trap Managers Configuring Community NamesConsole Login Configuration Using Tftp Protocol to Download Over the Network CheetahSwitch Workgroup-4508 Downloading System SoftwareConfiguring the Switch Enabled CheetahSwitch Workgroup-4508 Configuring Port ParametersUsing the Spanning Tree Algorithm Management Guide Viewing the Current Port ConfigurationPriority 32,768 Configuring Bridge STADisabled Configuring STA for PortsDisplaying the Current Bridge STA Displaying the Current STA for Ports Information. Port address table is cleared, and the port Igmp Multicast Filtering Management Guide Using a Mirror Port for AnalysisConfiguring Igmp Management Guide Broadcast Storm Control Refer to Network Monitor Menu / Static Unicast Address Table Port Priority Configuration Management Guide Configuring Traffic Classes802.1p Port Traffic Class Information MAX Vlan ID Management Guide Configuring Virtual LANs802.1Q Vlan Base Information VID 802.1Q Vlan Current Table Information802.1Q Vlan Static Table Configuration Pvid 802.1Q Vlan Port ConfigurationMenu Description Monitoring the SwitchCheetahSwitch Workgroup-4508 Displaying Port Statistics Displaying Rmon Statistics Formed MAC Using the Address TableVlan ID assigned to this multicast group Multicast IP VID MAC Management Guide Configuring Static Unicast AddressesParameter Post Resetting the SystemLogging Off the System Navigating the Web Browser Interface Using the Web AgentCheetahSwitch Workgroup-4508 Home Panel Display Console ConfigurationVlan SnmpSTA System Information Main Board Switch InformationIP Configuration Network ConfigurationSnmp Administration Enable Snmp ConfigurationCheetahSwitch Workgroup-4508 Access Host Trap Managers Management Guide Snmp CommunityFirmware Upgrade Options Security ConfigurationChange Password Web Upload ManagementTftp Download Management Address Table Configuration Spanning Tree Spanning Tree InformationPorts When the Switch Becomes Root Parameter Default Description Management Guide Spanning Tree ConfigurationSwitch Parameter Default Description Path Cost 100/19/4 STA Port ConfigurationBridge Capability Configuring Bridge MIB ExtensionsPriority Bridge SettingsPort Priority Configuration Port Traffic Class Information Vlan Basic Information Configuring VLANsVlan ID Management Guide Vlan Current TableVlan Static Table CheetahSwitch Workgroup-4508 Vlan Static ListVlan Static Membership by Port CheetahSwitch Workgroup-4508 Vlan Port Configuration Igmp Multicast Filtering Configuring IgmpPort Information Port MenusPort Configuration Etherlike Statistics Port Mirroring ConfigurationPort Statistics Sum of alignment errors and code errors frames received with Undersize Frames CheetahSwitch Workgroup-4508 Rmon StatisticsFCS or alignment error Broadcast Storm Control Spanning Tree Algorithm Advanced TopicsAssigning Ports to VLANs Virtual LANsForwarding Tagged/Untagged Frames Management Guide Vlan ClassificationPort Overlapping Igmp Snooping and IP Multicast Filtering Class-of-Service CoS SupportRemote Monitoring Snmp Management SoftwareCheetahSwitch Workgroup-4508 Upgrading Firmware via the Serial Port Console ConnectionIn-Band Connection Loader DB9 Port Pin Assignments Connection from Switch’s Serial Port to PC’s 9-Pin COM PortDB9 Serial Port Pin Description Switchs 9-Pin Ccitt Signal Modems Serial Port Pin COM Port Connection from Switchs Serial Port to PCs 25-Pin DTE PortSwitchs 9-Pin Serial Null Modem PortES4508 E022000-R01