| Management Guide |
|
|
Parameter | Description |
IP Address | IP address of the trap manager. |
Community Name | A community specified in the SNMP Communities table. |
Status | Sets administrative status of entry to enabled or disabled. |
Console Login Configuration
Use the Management Setup: Console Login Configuration to restrict management access based on specified user names and passwords, or to set the invalid password threshold and timeout. There are two user types, Administrator and Guest. Only the Administrator has write access for parameters governing the SNMP agent. You should therefore assign a user name and password to the Administrator as soon as possible, and store it in a safe place. (If for some reason your password is lost, or you can not gain access to the System Configuration Program, contact your Accton distributor for assistance.) The parameters shown on this screen are indicated in the following figure and table.
CheetahSwitch Workgroup - 4508 | ||
Console Login Configuration | ||
Password Threshold | : 3 | |
User Type | User Name | Password |
Admin : | admin |
|
Guest : | guest |
|
<APPLY> | <OK> | <CANCEL> |
Use <TAB> or arrow keys to move, other keys to make changes. | ||
|
|
|
Parameter | Default | Description |
Password | 3 | Sets the password intrusion threshold which limits the number |
Threshold |
| of failed logon attempts. |
|
| (Range: 0~65535) |
0 | The time (in seconds) the management console will be | |
|
| disabled due to an excessive number of failed logon attempts. |
|
| (Range: 0~65535) |
Admin1 | name: admin | Administrator has access privilege of Read/Write for all |
| password: null | screens. |
Guest1 | name: guest | Guest has access privilege of Read Only for all screens. |
| password: null |
|
1: Passwords can consist of up to 15 alphanumeric characters and are not case sensitive.