04Getting started
Chapter 4
Getting started
Switching on and setting up
When you switch the recorder on for the first time, you can make several basic settings using the Setup Navigator. This takes you through setting the clock and the internal TV tuner settings.
If you’re using the recorder for the first time, we strongly recommend you use the Setup Navigator before starting to use the recorder.
STANDBY/ON |
ENTER |
DVD RECORDER |
1Switch on your TV and set the video input to this recorder.
2 Press the STANDBY/ON button on the remote control or the front panel to switch on.
•When you switch on for the first time, your TV should display the Setup Navigator screen. (If the Setup Navigator doesn’t appear, you can also access it from the Initial Setup menu; see page 45).
18
3 Use the | (cursor left/right) buttons to |
choose a language, then press ENTER. | |
OSD Language |
|
OSD Language | English |
4Press ENTER to start setting up using the Setup Navigator.
Setup Navigator
Complete this setup before you start using your recorder.
Start
Cancel
Please use the Initial Setup if you want to make more detailed settings.
•If you don’t want to use the Setup Navigator, press (cursor down) to select Cancel, then press ENTER to exit the Setup Navigator.
5Select ‘Auto Scan’ to start automatic channel setup, then press ENTER.
Tuner
Auto Scan
Do not set
•Select Do not set if you want to skip setting up the channels (because they have already been set up, for example).
• Use the | (cursor left/right) buttons to | |||
choose your country, then press ENTER. | ||||
|
|
|
|
|
|
|
|
| |
|
| Country | Australia |
|
|
|
|
|
|
|
|
|
|
|
En
