
The Initial Setup menu | 08 |
There are three different recorder IDs. When set to Recorder2 or Recorder3, the remote control mode is shown in the front panel display.
Remote Control
Remote Control | Recorder1 |
|
|
After selecting a new recorder ID, you have to confirm the
change by selecting Yes or No (use the buttons), then pressing ENTER.
Remote Control
| Remote Control | Recorder2 |
|
|
|
| |
After changing this setting, the remote |
| ||
control mode must be changed. | Yes | No | |
OK to Continue ? |
Note that as soon as you change the recorder ID, the remote becomes inoperative until you change the remote to the same ID.
To set the remote, press and hold RETURN and a number button (1, 2 or 3) for five seconds.
Setup Navigator
•Default setting: n/a
Basic
Basic | Clock | OSD Language |
Disc | Tuner | Tuner |
Video | OSD Language | Clock |
Audio | Display |
|
Recording | Remote Control |
|
Playback | Setup Navigator |
|
| Power Save |
|
|
|
|
The Setup Navigator appears automatically when you switch on the recorder for the first time (or after resetting the recorder). It is also available from the Initial Settings menu should you need it at any other time.
See also Switching on and setting up on page 18.
Power Save
•Default setting: Off
Basic
Basic | Clock |
Disc | Tuner |
Video | OSD Language |
Audio | Display |
Recording | Remote Control |
Playback | Setup Navigator |
| Power Save |
Power Save |
|
Power Save | Off |
When set to Off, signals arriving at the ANTENNA IN terminal are passed through to the ANTENNA OUT terminal when the recorder is in standby.
•On – No through function for the antenna terminal
•Off – Through function for the antenna terminal
49
En