Paxar 611, 610, 612 user manual Do not pick up the printer By the supply holder

Page 15

3. Lift printhead assembly using the printhead tab until the assembly locks into place.

CAUTION

Make sure you use only approved Paxar supplies. See Appendix A, "Specifications and Accessories" for a list of Paxar supplies or contact your Paxar Representative for more information.

4.Place the roll of supply on the supply holder. Make sure the supply unrolls from the top as shown.

Supply Guides

Do not pick up the printer

by the supply holder.

5.Adjust the supply holder guides so the sides barely touch the roll. Make sure the supply roll turns freely.

Users Manual - 610/611/612 Printers

Loading Supplies ∙ 11

Image 15

Contents Paxar Systems Group Manual Edition March 610 / 611 / 612 PrintersThis page left blank intentionally Contents Troubleshooting Appendix a Specifications & AccessoriesContacting Paxar Getting Started Connecting the Power Cable AudienceUnpacking the Printer Connecting the Communication Cable Default Serial Port Communication ValuesEstablishing Communications Default Printer Settings Using the Control PanelPrinter Status Lights Status Code Box Button FunctionsSetting Dip Switches DIP Switches Verifier Lower DIP Switches Flow ControlDiagnostics Feed ModeLoading Supplies Loading Labels 610 Do not pick up the printer By the supply holder Peel Bar Ribbon Bar Loading Supplies ∙ 14 ∙ Loading Supplies Loading Labels 16 ∙ Loading Supplies Loading Supplies ∙ 18 ∙ Loading Supplies Loading Supplies ∙ Loading Ribbon Loading Supplies ∙ Take-up Reel Back Reel Loading Supplies ∙ Adjusting the Wide/Narrow Knobs Loading Supplies ∙ Printing PrintingPrinter Alignment Top and Bottom Copy Printing an Error LabelPreventing Jams Non-Printing ZonePrinting Serial Bar Codes Adjusting Print PositionsMargin Position Adjusting the Cut AngleSupply Position Print PositionAdjusting the Drop Tray Using the KnifeCare Symbol Font Samples Ginetex FontNafta Font Care and Maintenance Clearing a Knife Jam Clearing Supply JamsCleaning 36 ∙ Care and Maintenance Replacing the Printhead 38 ∙ Care and Maintenance Care and Maintenance ∙ Snap the printhead into place Adjusting the Print Contrast Replacing the Fuse Lubricating the Knife Troubleshooting Printing a Test Label Problem Action TroubleshootingData Errors Error MessagesOption number must be 1, 4, 30, 31, 42, 50, 60, or Troubleshooting ∙ 50 ∙ Troubleshooting Troubleshooting ∙ Communication Failures Error Description/ActionData Formatting Errors Machine Faults Troubleshooting ∙ Printer Specifications Appendix a Specifications & AccessoriesPaxar Systems Supply SpecificationsRibbon Widths Ribbon SpecificationsContacting Paxar Accessories