Paxar 612, 611, 610 user manual 16 ∙ Loading Supplies

Page 20

3. Lift printhead assembly using the printhead tab until the assembly locks into place.

CAUTION

Make sure you use only approved Paxar supplies. See Appendix A, "Specifications and Accessories" for a list of Paxar supplies or contact your Paxar Representative for more information.

4.Place the roll of supply on the supply holder. Make sure the supply unrolls from the top as shown.

Supply Guides

Do not pick up the printer

by the supply holder.

5.Adjust the supply holder guides so the sides barely touch the roll. Make sure the supply roll turns freely.

16 ∙ Loading Supplies

Users Manual - 610/611/612 Printers

Image 20

Contents 610 / 611 / 612 Printers Paxar Systems Group Manual Edition MarchThis page left blank intentionally Contents Contacting Paxar TroubleshootingAppendix a Specifications & Accessories Getting Started Unpacking the Printer Connecting the Power CableAudience Establishing Communications Connecting the Communication CableDefault Serial Port Communication Values Printer Status Lights Default Printer SettingsUsing the Control Panel Button Functions Status Code BoxSetting Dip Switches DIP Switches Lower DIP Switches Flow Control DiagnosticsFeed Mode VerifierLoading Supplies Loading Labels 610 Do not pick up the printer By the supply holder Peel Bar Ribbon Bar Loading Supplies ∙ 14 ∙ Loading Supplies Loading Labels 16 ∙ Loading Supplies Loading Supplies ∙ 18 ∙ Loading Supplies Loading Supplies ∙ Loading Ribbon Loading Supplies ∙ Take-up Reel Back Reel Loading Supplies ∙ Adjusting the Wide/Narrow Knobs Loading Supplies ∙ Printing PrintingPrinting an Error Label Printer Alignment Top and Bottom CopyNon-Printing Zone Preventing JamsAdjusting Print Positions Printing Serial Bar CodesAdjusting the Cut Angle Supply PositionPrint Position Margin PositionUsing the Knife Adjusting the Drop TrayNafta Font Care Symbol Font SamplesGinetex Font Care and Maintenance Clearing Supply Jams Clearing a Knife JamCleaning 36 ∙ Care and Maintenance Replacing the Printhead 38 ∙ Care and Maintenance Care and Maintenance ∙ Snap the printhead into place Adjusting the Print Contrast Replacing the Fuse Lubricating the Knife Troubleshooting Printing a Test Label Troubleshooting Problem ActionError Messages Data ErrorsOption number must be 1, 4, 30, 31, 42, 50, 60, or Troubleshooting ∙ 50 ∙ Troubleshooting Troubleshooting ∙ Error Description/Action Communication FailuresData Formatting Errors Machine Faults Troubleshooting ∙ Appendix a Specifications & Accessories Printer SpecificationsSupply Specifications Paxar SystemsRibbon Specifications Ribbon WidthsAccessories Contacting Paxar