Paxar 612, 611, 610 user manual Snap the printhead into place

Page 44

9.Snap the printhead into place.

Do not touch here

Make sure the printhead cable does not

touch the ribbon roll.

10.Clean the new printhead with a cotton swab dipped in isopropyl alcohol to remove any salt or oil left from handling.

11.Let the printhead dry and reload your supplies.

12.Close the printhead assembly and the cover.

13.Turn on the printer.

14.Press Feed to position the supply under the printhead.

40 ∙ Care and Maintenance

Users Manual - 610/611/612 Printers

Image 44

Contents 610 / 611 / 612 Printers Paxar Systems Group Manual Edition MarchThis page left blank intentionally Contents Contacting Paxar TroubleshootingAppendix a Specifications & Accessories Getting Started Unpacking the Printer Connecting the Power CableAudience Establishing Communications Connecting the Communication CableDefault Serial Port Communication Values Printer Status Lights Default Printer SettingsUsing the Control Panel Button Functions Status Code BoxSetting Dip Switches DIP Switches Lower DIP Switches Flow Control DiagnosticsFeed Mode VerifierLoading Supplies Loading Labels 610 Do not pick up the printer By the supply holder Peel Bar Ribbon Bar Loading Supplies ∙ 14 ∙ Loading Supplies Loading Labels 16 ∙ Loading Supplies Loading Supplies ∙ 18 ∙ Loading Supplies Loading Supplies ∙ Loading Ribbon Loading Supplies ∙ Take-up Reel Back Reel Loading Supplies ∙ Adjusting the Wide/Narrow Knobs Loading Supplies ∙ Printing PrintingPrinting an Error Label Printer Alignment Top and Bottom CopyNon-Printing Zone Preventing JamsAdjusting Print Positions Printing Serial Bar CodesAdjusting the Cut Angle Supply PositionPrint Position Margin PositionUsing the Knife Adjusting the Drop TrayNafta Font Care Symbol Font SamplesGinetex Font Care and Maintenance Clearing Supply Jams Clearing a Knife JamCleaning 36 ∙ Care and Maintenance Replacing the Printhead 38 ∙ Care and Maintenance Care and Maintenance ∙ Snap the printhead into place Adjusting the Print Contrast Replacing the Fuse Lubricating the Knife Troubleshooting Printing a Test Label Troubleshooting Problem ActionError Messages Data ErrorsOption number must be 1, 4, 30, 31, 42, 50, 60, or Troubleshooting ∙ 50 ∙ Troubleshooting Troubleshooting ∙ Error Description/Action Communication FailuresData Formatting Errors Machine Faults Troubleshooting ∙ Appendix a Specifications & Accessories Printer SpecificationsSupply Specifications Paxar SystemsRibbon Specifications Ribbon WidthsAccessories Contacting Paxar