Paxar 612, 611, 610 user manual Ribbon Specifications, Ribbon Widths

Page 62

Ribbon Specifications

Ribbon Storage:

Do not leave ribbon in direct sunlight, high temperatures, or high

 

humidity.

Ribbon Type:

CT1111 (Paxar Systems)

Ribbon Widths:

CT1111 is available in the following widths:

 

1.3 inches (33 mm)

 

1.61 inches (41 mm)

 

2.16 inches (55 mm)

 

4.1 inches (105 mm)

 

________

 

For best results, use a ribbon that is 0.25

 

Inches (6.35 mm) wider than your fabric.

 

________

 

 

Ribbon Length:

23,600 inches (600 meters)

 

________

 

Contact your Paxar Representative for more

 

Information about approved ink products.

 

Additional configurations may be available.

 

________

58 Appendix A - Specifications & Accessories

Users Manual - 610/611/612 Printers

Image 62
Contents 610 / 611 / 612 Printers Paxar Systems Group Manual Edition MarchThis page left blank intentionally Contents Contacting Paxar TroubleshootingAppendix a Specifications & Accessories Getting Started Unpacking the Printer Connecting the Power CableAudience Establishing Communications Connecting the Communication CableDefault Serial Port Communication Values Printer Status Lights Default Printer SettingsUsing the Control Panel Button Functions Status Code BoxSetting Dip Switches DIP Switches Feed Mode Lower DIP Switches Flow ControlDiagnostics VerifierLoading Supplies Loading Labels 610 Do not pick up the printer By the supply holder Peel Bar Ribbon Bar Loading Supplies ∙ 14 ∙ Loading Supplies Loading Labels 16 ∙ Loading Supplies Loading Supplies ∙ 18 ∙ Loading Supplies Loading Supplies ∙ Loading Ribbon Loading Supplies ∙ Take-up Reel Back Reel Loading Supplies ∙ Adjusting the Wide/Narrow Knobs Loading Supplies ∙ Printing PrintingPrinting an Error Label Printer Alignment Top and Bottom CopyNon-Printing Zone Preventing JamsAdjusting Print Positions Printing Serial Bar CodesPrint Position Adjusting the Cut AngleSupply Position Margin PositionUsing the Knife Adjusting the Drop TrayNafta Font Care Symbol Font SamplesGinetex Font Care and Maintenance Clearing Supply Jams Clearing a Knife JamCleaning 36 ∙ Care and Maintenance Replacing the Printhead 38 ∙ Care and Maintenance Care and Maintenance ∙ Snap the printhead into place Adjusting the Print Contrast Replacing the Fuse Lubricating the Knife Troubleshooting Printing a Test Label Troubleshooting Problem ActionError Messages Data ErrorsOption number must be 1, 4, 30, 31, 42, 50, 60, or Troubleshooting ∙ 50 ∙ Troubleshooting Troubleshooting ∙ Error Description/Action Communication FailuresData Formatting Errors Machine Faults Troubleshooting ∙ Appendix a Specifications & Accessories Printer SpecificationsSupply Specifications Paxar SystemsRibbon Specifications Ribbon WidthsAccessories Contacting Paxar