Paxar 610, 611, 612 user manual Peel Bar Ribbon Bar

Page 16

6.Push down on the supply lever to unlock the supply guides.

7.Lay the label strip across the supply guide. Lift the auxiliary rollers slightly and thread the supply under the rollers until it appears in the knife opening.

Peel Bar

Ribbon Bar

CAUTION

Make sure the supply is straight in the supply path and

aligned with the printhead.

8. Tuck the supply under the nibs.

Nibs

Supply Lever

__________

Make sure a few inches of supply are past the front end of the printer.

__________

12 ∙ Loading Supplies

Users Manual - 610/611/612 Printers

Image 16

Contents 610 / 611 / 612 Printers Paxar Systems Group Manual Edition MarchThis page left blank intentionally Contents Appendix a Specifications & Accessories TroubleshootingContacting Paxar Getting Started Audience Connecting the Power CableUnpacking the Printer Default Serial Port Communication Values Connecting the Communication CableEstablishing Communications Using the Control Panel Default Printer SettingsPrinter Status Lights Button Functions Status Code BoxSetting Dip Switches DIP Switches Lower DIP Switches Flow Control DiagnosticsFeed Mode VerifierLoading Supplies Loading Labels 610 Do not pick up the printer By the supply holder Peel Bar Ribbon Bar Loading Supplies ∙ 14 ∙ Loading Supplies Loading Labels 16 ∙ Loading Supplies Loading Supplies ∙ 18 ∙ Loading Supplies Loading Supplies ∙ Loading Ribbon Loading Supplies ∙ Take-up Reel Back Reel Loading Supplies ∙ Adjusting the Wide/Narrow Knobs Loading Supplies ∙ Printing PrintingPrinting an Error Label Printer Alignment Top and Bottom CopyNon-Printing Zone Preventing JamsAdjusting Print Positions Printing Serial Bar CodesAdjusting the Cut Angle Supply PositionPrint Position Margin PositionUsing the Knife Adjusting the Drop TrayGinetex Font Care Symbol Font SamplesNafta Font Care and Maintenance Clearing Supply Jams Clearing a Knife JamCleaning 36 ∙ Care and Maintenance Replacing the Printhead 38 ∙ Care and Maintenance Care and Maintenance ∙ Snap the printhead into place Adjusting the Print Contrast Replacing the Fuse Lubricating the Knife Troubleshooting Printing a Test Label Troubleshooting Problem ActionError Messages Data ErrorsOption number must be 1, 4, 30, 31, 42, 50, 60, or Troubleshooting ∙ 50 ∙ Troubleshooting Troubleshooting ∙ Error Description/Action Communication FailuresData Formatting Errors Machine Faults Troubleshooting ∙ Appendix a Specifications & Accessories Printer SpecificationsSupply Specifications Paxar SystemsRibbon Specifications Ribbon WidthsAccessories Contacting Paxar