Paxar 611, 610, 612 user manual Printing Serial Bar Codes, Adjusting Print Positions

Page 33

Printing Serial Bar Codes

Currently, the 610 / 611 / 612 printer does not support printing serial (ladder) bar codes.

Parallel (Picket Fence) Bar Code

Serial (Ladder) Bar Code

Adjusting Print Positions

You can adjust the supply, print, and margin positions by using the control panel buttons. Make sure a batch is not waiting to print, the printer is not paused, or has an error before you change the settings.

To change the supply, print, or margin positions:

1.Press Pause.

2.Press Feed and Clear (at the same time) once to select the supply position, twice to select the print position, and three times to select the margin position. These buttons act as toggle switches between the three (supply, print, and margin) position

adjustments.

When you select the position to change, the current setting

is displayed.

3.Press Feed to decrease the current position by one dot or press Feed for two seconds to decrease the value by 10 dots.

OR

Press Clear to increase the current position by one dot or press Clear for two seconds to increase the value by 10 dots.

If the position has a negative value, the supplies light is on.

After you adjust the position (and release the buttons), the

setting is displayed.

4. Press Pause when you are done making adjustments.

Users Manual - 610/611/612 Printers

Printing ∙ 29

Image 33

Contents Paxar Systems Group Manual Edition March 610 / 611 / 612 PrintersThis page left blank intentionally Contents Troubleshooting Appendix a Specifications & AccessoriesContacting Paxar Getting Started Connecting the Power Cable AudienceUnpacking the Printer Connecting the Communication Cable Default Serial Port Communication ValuesEstablishing Communications Default Printer Settings Using the Control PanelPrinter Status Lights Status Code Box Button FunctionsSetting Dip Switches DIP Switches Diagnostics Lower DIP Switches Flow ControlFeed Mode VerifierLoading Supplies Loading Labels 610 Do not pick up the printer By the supply holder Peel Bar Ribbon Bar Loading Supplies ∙ 14 ∙ Loading Supplies Loading Labels 16 ∙ Loading Supplies Loading Supplies ∙ 18 ∙ Loading Supplies Loading Supplies ∙ Loading Ribbon Loading Supplies ∙ Take-up Reel Back Reel Loading Supplies ∙ Adjusting the Wide/Narrow Knobs Loading Supplies ∙ Printing PrintingPrinter Alignment Top and Bottom Copy Printing an Error LabelPreventing Jams Non-Printing ZonePrinting Serial Bar Codes Adjusting Print PositionsSupply Position Adjusting the Cut AnglePrint Position Margin PositionAdjusting the Drop Tray Using the KnifeCare Symbol Font Samples Ginetex FontNafta Font Care and Maintenance Clearing a Knife Jam Clearing Supply JamsCleaning 36 ∙ Care and Maintenance Replacing the Printhead 38 ∙ Care and Maintenance Care and Maintenance ∙ Snap the printhead into place Adjusting the Print Contrast Replacing the Fuse Lubricating the Knife Troubleshooting Printing a Test Label Problem Action TroubleshootingData Errors Error MessagesOption number must be 1, 4, 30, 31, 42, 50, 60, or Troubleshooting ∙ 50 ∙ Troubleshooting Troubleshooting ∙ Communication Failures Error Description/ActionData Formatting Errors Machine Faults Troubleshooting ∙ Printer Specifications Appendix a Specifications & AccessoriesPaxar Systems Supply SpecificationsRibbon Widths Ribbon SpecificationsContacting Paxar Accessories