3Com manual 3-11, 3COM Security Switch 6200 Hardware and Software Users Guide

Interface Connections and First Time Start-Up

SNMP Communities

================

Community	Address	Netmask	Access
middle	10.1.1.22	255.255.255.255	read-write

Add the SNMP Communities <Y or N>[N]:

7.Configure the individual user accounts.

Accounts Configuration

=======================

This section allows you to change your “root” password. Additionally, you can set up accounts for users to log into once the Interview is complete.

Set 'root' Password <Y or N>[Y]:

Additional user accounts can be defined, each with its own username and password.

Add or Modify User Accounts <Y or N>[Y]: Enter User Name []:

Enter password: Verify password:

Enable Login Access <disabled, enabled>[disabled]: Enter Access Level <Guest, Network Operator, Service Operator, Administrator>[Guest]:

The following is an example display showing configured users.

User Accounts

=============

User Name	Login Access	Access Level
admin	enabled	Administrator
foobar	enabled	Guest

Add or Modify User Accounts <Y or N>[Y]: n

8.Configure the host interfaces.

Host Interfaces

===============

This section will help you configure interfaces on the Host. The system has two management ports, two GigaBit Ethernet ports, and 16 10/100 ports.

NOTE: At least one management port must be configured on the system.

3COM Security Switch 6200 Hardware and Software Users Guide 3-11