3Com 6200 manual Saving Your System Configuration, Restoring, Displaying, 4-21, filename

Configuring the Security Switch 6200 System

Exiting from the Configuration Tool

To exit from the system Configure Tool, select Option X from the main menu.

Enter choice <1 - 12, X>[X]: X

Saving Your

System

Configuration

To save your configuration, at the admin prompt, use the following command:

[admin@xxxxx bin]# ./cos_show_system -f /directory/ filename

	Where the directory specifies the directory where the file is located, and
	the filename is the actual configuration file. The following is an example of
	this command:
	[admin@helios bin]$ ./cos_show_system -f /tmp/foo
Restoring	To restore your configuration to its previous configuration, at the admin
Your System	prompt, use the following command:
	[admin@xxxxx bin]# ./cos_set_system -f /directory/
Configuration
	filename
	Where the directory specifies the directory where the file is located, and
	the filename is the actual configuration file. The following is an example of
	this command:
	[admin@helios bin]$ ./cos_set_system -f /tmp/foo
Displaying	To display a configuration, at the admin prompt, use the following command:
Your System	[admin@xxxxx bin]# ./cos_show_system
Configuration	The following is an example of this command:
	[admin@helios bin]$ ./cos_show_system
	<system>
	<data
	hostname="helios"
	domainname="3com.com"
	timezone="America/New_York"
	telnet_server="enabled"
	ftp_server="enabled"
	gateway="192.168.10.1"
	</data>
	</system>
	<ntp_server>
	<data
	address="127.127.1.0"
	></data>
	</ntp_server>
	<dns_server>
	<data

3COM Security Switch 6200 Hardware and Software Users Guide 4-21