3Com 6200 manual Configuring, Parameters, System

Configuring the Security Switch 6200 System

	Configuration
	=========
	1)	System Parameters
	2)	User Accounts
	3)	Network Time Protocol (NTP)
	4)	Domain Name Service (DNS)
	5)	Simple Network Management Protocol (SNMP)
	6)	Physical Interfaces
	7)	Tap Interfaces
	8)	Network Interfaces
	9)	IP Aliases
	10) Static Routes
	11) Static ARP Entries
	12) Virtual Router Redundancy Protocol (VRRP)
	X) Exit
	To begin your configuration, select the desired option from the main menu.
	NOTE: Within this configuration tool, you can type the initial letter of an
	option and the press the Tab key to complete the entire string on supported
	choices. The Enter key is used to select default values.
Configuring	This section describes how to change your system settings. Specifically,
System	how to:
Parameters	• Change the system host name and domain name
	• Change system information
	• Change time information
	• Enable external access ability
	To configure system parameters:
	1. Select Option 1 from the main menu.
	The present System Configuration is displayed. For example:
	System
	======		helios
	Host Name
	Domain Name		Mon Apr 07 15:28:27 EDT 2003
	Date and Time
	Time Zone		enabled
	Telnet Server
	FTP Server		enabled
	WEB Timeout		20
	Default Gateway 192.168.10.1

Would You Like to Modify the System Parameters <Y or

N>[N]:

4-2 3COM Security Switch 6200 Hardware and Software Users Guide