Cable requirements
The cable requirements for your system will vary depending on the types of CPUs connected to the UltraMatrix switch and the equipment used for the KVM station. A KVM cable is needed for each KVM station, a CPU cable is needed for each computer that is connected to the UltraMatrix, and if the Units are connected in a “Bus” or “Ring” topology, expansion cables will be needed to connect the Units together.
(See Appendix B for cable part numbers.)
Package contents
The UltraMatrix switch
RJ12 Serial cable
RJ to DB9 adapter
Power cord (North American shipments only)
Installation and operations manual
CPU, KVM, and expansion cables are usually ordered and shipped separately. If the package contents are not correct, contact Rose Electronics or your reseller, so the discrepancy can be quickly resolved.
Rose Electronics web site
Visit our web site at www.rose.com for additional information on the UltraMatrix switch and other products offered by Rose Electronics that are designed for data center applications, classroom environments, and many other applications.