Rose electronic 2xE manual Cpu

Appendix D. Status Connect / Failure Reason Summary

Reason	Description	Action
Can’t Find	Unable to communicate	Change invalid starting
Computer	to the computer that’s	computer number,
	being connected to.	incorrect expansion
		cable placement or
		power up expansion
		Unit.
Computer is	Another user is	Wait for the private
Private	connected in private	user to disconnect and
	mode.	retry the connect
		request.
No Response	Communications error.	Cycle power to the
		UltraMatrix switch
		where the CPU is
		attached.
Not in Access	A user profile specifies a	Connect to another
Group	group without access to	computer, use another
	this computer.	group, or include the
		computer in the user’s
		group.
Out of Range	Attempt to connect to a	Connect to a computer
	computer with a number	with a lower number
	greater than the	than the maximum or
	maximum computer	reconfigure all Units
	parameter.	with a higher maximum
		computer number.
Queue Full	The Maximum number of	Wait until a user
	KVM stations is already	disconnects from the
	connected to the CPU	CPU
Unknown	Attempt to connect to a	Change request to
Computer	computer number greater	another computer
	than the Maximum	number.
	computer number
Unknown Reason	Internal error occurred	Cycle power on all
	during	Units affected.
	connect/disconnect.

ULTRAMATRIX E-SERIES MANUAL

67