SUPER MICRO Computer AOC-LPZCR1, AOC-SOZCR1 manual To Exit the Adaptec RAID Conﬁguration Utility

Page 44

AOC-LPZCR1/AOC-SOZCR1 Manual

3.3.2.2 To Verify Disk Media

1.Power on your computer. When prompted, press the <Ctrl> and <A> keys simultaneously to access the Adaptec RAID Conﬁ guration Utility. From the RAID Conﬁ guration Main Menu, select "Disk Utilities" and press <Enter>. After disk scan, the following screen displays:

2.Whe a dialogue box as shown above displays, prompting you to make a selection, select the disk you wish to verify and press <Enter>.

3.Then, select "Verify Disk Media" from the displayed dialogue box and press <Enter>.

4.A dialogue box appears, showing you the status of the disk drive, and warn- ing you that the disk drive selected will be scanned for media defects, and all recoverable defects will be remapped.

5.Press <Yes> to continue with disk drive veriﬁ cation. Press <No> to return to the previous menu.

3.4 To Exit the Adaptec RAID Conﬁguration Utility

Once you have ﬁ nished conﬁ guring RAID array disk drives, press <Esc> to re- turn to the Exit Menu. Select Yes and press <Enter> to exit the Adaptec RAID Conﬁ guration Utility.

3-28

Image 44

Contents Super AOC-LPZCR1/AOC-SOZCR1 Users Guide Table of Contents Introduction AOC-SOZCR1 Series the Terminator Socket Dimm ZCR CardKey RAID Features Operating Systems supportedManagement support AOC-LPZCR1 Series -Low Proﬁle Skyhawk ZCR RAID CardAsia-Paciﬁc HeadquartersEurope Chapter Technical Speciﬁcations and Software Installation AOC-LPZCR1 Card Layout and Jumper LocationsDescription Jumper and Connector Descriptions *AOC-LPZCR1Jumper Description Connectors and LED Indicators *AOC-LPZCR1 Activity LED IndicatorBuzzer Connector I2C Cable ConnectionRear view AOC-SOZCR1 AOC-SOZCR1 Card Layout and Jumper LocationsFront view AOC-SOZCR1 Connector and Header Descriptions *AOC-SOZCR1 SMB Connector and Pin Deﬁnitions *AOC-SOZCR1SMB I 2C 2C cable ConnectionIntelligent Interface Management SAF-TE See Note 1 belowESD Safety Guidelines General Safety GuidelinesCreating the Driver Floppy Disk Adding the Driver into an Existing SystemFor the Windows 32-bit Operating System For the Red Hat/SuSE Operating SystemFor the SuSE Operating System Installing the Driver into a New SystemFor the Red Hat Operating System AOC-LPZCR1/AOC-SOZCR1 Users Guide Conﬁguring Jumper Settings Chapter RAID ConﬁgurationTo Use the Adaptec RAID Conﬁguration Utility Using Adaptecs RAID Conﬁguration UtilitySAS, Sata and Scsi settings Using the Array Conﬁguration Utility RAID Conﬁguration Utility Main MenuTo Create Arrays Array Conﬁguration Utility Main MenuPage To Manage Arrays To assign properties to the new arrayTo View the properties of Existing Arrays Deleting Arrays Setting a Bootable Array Adding a Hotspare Disk Drive Deleting a Hotspare Disk Drive Initializing Disk Drives To initialize Disk drivesPage Page To Rescan Disk drives Rebuilding Arrays To Rebuild an arrayTo Secure Erase Drives Page Using Adaptecs SCSISelect Utility Using the Controller Conﬁguration UtilityUsing the Scsi Conﬁguration Utility Page Page To Use the SATASelect Utility Using Adaptecs SATASelect UtilityUsing the Sata Conﬁguration Utility Using Adaptecs Serial Select Utility To Use the SerialSelect UtilityUsing Physical Conﬁguration Utility Using Disk Utilities To Use Disk Utilities *for Scsi onlyPage To Use Disk Utilities *for Sata and SAS only To Format a Disk DriveTo Exit the Adaptec RAID Conﬁguration Utility To Verify Disk MediaChapter Troubleshooting Contacting Supermicros Technical Support