Seagate ST400FX0002, ST100FX0002 manual Applicable standards and reference documentation, Standards

Page 11

3.0Applicable standards and reference documentation

The drives documented in this manual have been developed as system peripherals to the highest standards of design and construction. The drives depend on host equipment to provide adequate power and environment for optimum performance and compliance with applicable industry and governmental regulations. Special attention must be given in the areas of safety, power distribution, shielding, audible noise control, and temper- ature regulation. In particular, the drives must be securely mounted to guarantee the specified performance characteristics. Mounting by bottom holes must meet the requirements of Section 10.3.

3.1Standards

The Pulsar XT.2 family complies with Seagate standards as noted in the appropriate sections of this manual and the Seagate SAS Interface Manual, part number 100293071.

The drives are recognized in accordance with UL 60950 and CSA 60950 as tested by UL(CSA) and EN60950 as tested by TUV.

The security features of Self-Encrypting Drive models are based on the “TCG Storage Architecture Core Spec- ification” and the “TCG Storage Workgroup Security Subsystem Class: Enterprise_A” specification with addi- tional vendor-unique features as noted in this product manual.

3.1.1Electromagnetic compatibility

The drive, as delivered, is designed for system integration and installation into a suitable enclosure prior to use. The drive is supplied as a subassembly and is not subject to Subpart B of Part 15 of the FCC Rules and Regulations nor the Radio Interference Regulations of the Canadian Department of Communications.

The design characteristics of the drive serve to minimize radiation when installed in an enclosure that provides reasonable shielding. The drive is capable of meeting the Class B limits of the FCC Rules and Regulations of the Canadian Department of Communications when properly packaged; however, it is the user’s responsibility to assure that the drive meets the appropriate EMI requirements in their system. Shielded I/O cables may be required if the enclosure does not provide adequate shielding. If the I/O cables are external to the enclosure, shielded cables should be used, with the shields grounded to the enclosure and to the host controller.

3.1.1.1Electromagnetic susceptibility

As a component assembly, the drive is not required to meet any susceptibility performance requirements. It is the responsibility of those integrating the drive within their systems to perform those tests required and design their system to ensure that equipment operating in the same system as the drive or external to the system does not adversely affect the performance of the drive. See Tables 8 through 10, DC power requirements.

Pulsar XT.2 SAS Product Manual, Rev. B

3

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Standard Models Self-Encrypting Drive Models ST400FX0002ST400FX0012 ST200FX0002 ST100FX0002Revision history Contents About self-encrypting drives Physical/electrical specificationsDefect and error management InstallationPage Pulsar XT.2 SAS Product Manual, Rev. B List of Figures Page Seagate Online Support and Services Seagate Technology support servicesScope Electromagnetic susceptibility Applicable standards and reference documentationStandards Electromagnetic compatibilityKorean KCC Electromagnetic complianceElectromagnetic compliance for the European Union Australian C-TickChina Restriction of Hazardous Substances RoHS Directive Reference documentsGeneral description Standard featuresReliability Media descriptionPerformance Programmable drive capacity Factory-installed optionsFormatted capacities Thin Provisioning Drive Configuration Access time Performance characteristicsInternal drive characteristics Performance characteristicsPerformance Format Mode Dcrt Bit IP Bit 400GB 200GB 100GBCaching write data Start/stop timeCache control Error rates Reliability specificationsEndurance Management Lifetime Endurance Management Reliability and servicePreventive maintenance Data RetentionPerformance impact Maximum processing delay Fully-enabled delay4 S.M.A.R.T Controlling S.M.A.R.TThermal monitor Predictive failuresImplementation State of the drive prior to testingDrive Self Test DST DST failure definitionLog page entries Short and extended testsShort test Function Code 001b Extended test Function Code 010bStorage Product warrantyShipping Product repair and return informationAC power requirements Physical/electrical specificationsPower specifications 400GB standard model DC power requirements DC power requirements200GB standard model DC power requirements 100GB standard model DC power requirements Current profiles General DC power requirement notesPower sequencing Conducted noise immunityCurrent profiles for 200GB models 200GB models in 6Gb operation Power dissipation400GB models in 6Gb operation 100GB models in 6Gb operation Temperature a. OperatingEnvironmental limits Shock and vibration Relative humidityEffective altitude sea level a. Operating Recommended mounting ShockCorrosive environment Air cleanlinessVibration a. Operating-normal Mounting configuration dimensions 400GB models Mechanical specificationsWeight Pounds 100 grams Data encryption Controlled accessAdmin SP About self-encrypting drivesData bands Default passwordRandom number generator RNG Drive lockingCryptographic erase Authenticated firmware downloadPower requirements Supported commandsSSD Physical format address descriptor Bit Byte Defect and error managementDrive internal defects/errors Auto-Reallocation Drive error recovery proceduresSAS system errors Background Media ScanIdentifying a Protection Information drive Setting and determining the current Type LevelProtection Information PI Levels of PIDrive orientation InstallationAir flow CoolingGrounding Drive mountingInterface requirements SAS featuresDual port support Supported commands Scsi commands supportedPersistent Reserve Read Capacity Write Inquiry data Mode Sense dataPage 14 1a 00 1a Mode Sense data for 400GB drivesMode Pages Mode Sense data for 200GB drivesMode Sense values for 100GB drives SAS physical interface Miscellaneous operating features and conditionsMiscellaneous features Miscellaneous statusDatum B Section C C Section a a Pin descriptions Physical characteristicsConnector requirements Electrical descriptionReady LED Out Signal characteristicsPower SAS transmitters and receiversGeneral interface characteristics SAS-2 Specification complianceLED drive signal Differential signalsNumerics IndexPage RNG See also cooling Page Americas Seagate Technology LLC
Top Page Image Contents