Seagate ST400FX0012, ST100FX0002 Relative humidity, Effective altitude sea level a. Operating

Page 38

b.Non-operating

–40° to 158°F (–40° to 70°C) package ambient with a maximum gradient of 36°F (20°C) per hour. This specification assumes that the drive is packaged in the shipping container designed by Seagate for use with drive.

Figure 7. Temperature check point location - 15mm drives

Figure 8. Temperature check point location - 7mm drives

Note. Images may not represent actual product, for reference only.

7.5.2Relative humidity

The values below assume that no condensation on the drive occurs.

a.Operating

5% to 95% non-condensing relative humidity with a maximum gradient of 20% per hour.

b.Non-operating

5% to 95% non-condensing relative humidity.

7.5.3Effective altitude (sea level) a. Operating

–200 to +10,000 feet (–60.96 to +3048 meters) b. Non-operating

–200 to +40,000 feet (–60.96 to +12,192 meters)

7.5.4Shock and vibration

Shock and vibration limits specified in this document are measured directly on the drive chassis. If the drive is installed in an enclosure to which the stated shock and/or vibration criteria is applied, resonances may occur internally to the enclosure resulting in drive movement in excess of the stated limits. If this situation is apparent, it may be necessary to modify the enclosure to minimize drive movement.

The limits of shock and vibration defined within this document are specified with the drive mounted by any of the four methods shown in Figure 9, and in accordance with the restrictions of Section 10.3.

30	Pulsar XT.2 SAS Product Manual, Rev. B

Image 38

Contents ST400FX0002ST400FX0012 ST200FX0002 ST100FX0002 Standard Models Self-Encrypting Drive ModelsRevision history Contents Installation Physical/electrical specificationsDefect and error management About self-encrypting drivesPage Pulsar XT.2 SAS Product Manual, Rev. B List of Figures Page Seagate Technology support services Seagate Online Support and ServicesScope Electromagnetic compatibility Applicable standards and reference documentationStandards Electromagnetic susceptibilityAustralian C-Tick Electromagnetic complianceElectromagnetic compliance for the European Union Korean KCCReference documents China Restriction of Hazardous Substances RoHS DirectiveStandard features General descriptionReliability Media descriptionPerformance Programmable drive capacity Factory-installed optionsFormatted capacities Thin Provisioning Drive Configuration Performance characteristics Performance characteristicsInternal drive characteristics Access timeFormat Mode Dcrt Bit IP Bit 400GB 200GB 100GB PerformanceCaching write data Start/stop timeCache control Reliability specifications Error ratesEndurance Management Data Retention Reliability and servicePreventive maintenance Lifetime Endurance ManagementControlling S.M.A.R.T Maximum processing delay Fully-enabled delay4 S.M.A.R.T Performance impactPredictive failures Thermal monitorDST failure definition State of the drive prior to testingDrive Self Test DST ImplementationExtended test Function Code 010b Short and extended testsShort test Function Code 001b Log page entriesProduct repair and return information Product warrantyShipping StorageAC power requirements Physical/electrical specificationsPower specifications DC power requirements 400GB standard model DC power requirements200GB standard model DC power requirements 100GB standard model DC power requirements Conducted noise immunity General DC power requirement notesPower sequencing Current profilesCurrent profiles for 200GB models 200GB models in 6Gb operation Power dissipation400GB models in 6Gb operation 100GB models in 6Gb operation Temperature a. OperatingEnvironmental limits Shock and vibration Relative humidityEffective altitude sea level a. Operating Shock Recommended mountingCorrosive environment Air cleanlinessVibration a. Operating-normal Mechanical specifications Mounting configuration dimensions 400GB modelsWeight Pounds 100 grams About self-encrypting drives Controlled accessAdmin SP Data encryptionDrive locking Default passwordRandom number generator RNG Data bandsSupported commands Authenticated firmware downloadPower requirements Cryptographic eraseSSD Physical format address descriptor Bit Byte Defect and error managementDrive internal defects/errors Background Media Scan Drive error recovery proceduresSAS system errors Auto-ReallocationLevels of PI Setting and determining the current Type LevelProtection Information PI Identifying a Protection Information driveInstallation Drive orientationCooling Air flowDrive mounting GroundingSAS features Interface requirementsDual port support Scsi commands supported Supported commandsPersistent Reserve Read Capacity Write Mode Sense data Inquiry dataPage Mode Sense data for 400GB drives 14 1a 00 1aMode Sense data for 200GB drives Mode PagesMode Sense values for 100GB drives Miscellaneous status Miscellaneous operating features and conditionsMiscellaneous features SAS physical interfaceDatum B Section C C Section a a Electrical description Physical characteristicsConnector requirements Pin descriptionsSAS transmitters and receivers Signal characteristicsPower Ready LED OutDifferential signals SAS-2 Specification complianceLED drive signal General interface characteristicsIndex NumericsPage RNG See also cooling Page Seagate Technology LLC Americas