Seagate ST400FX0002, ST100FX0002, ST200FX0002, ST400FX0012 manual Shock, Recommended mounting

Page 39

7.5.4.1Shock

a.Operating—normal

The drive, as installed for normal operation, shall operate error free while subjected to intermittent shock not exceeding:

•1000 Gs at a maximum duration of 0.5ms (half sinewave)

Shock may be applied in the X, Y, or Z axis. Shock is not to be repeated more than once every 2 seconds.

Note. This specification does not cover connection issues that may result from testing at this level.

b.Non-operating

The limits of non-operating shock shall apply to all conditions of handling and transportation. This includes both isolated drives and integrated drives.

The drive subjected to nonrepetitive shock not exceeding the three values below, shall not exhibit device damage or performance degradation.

•1000 Gs at a maximum duration of 0.5ms (half sinewave) Shock may be applied in the X, Y, or Z axis.

c.Packaged

Seagate finished drive bulk packs are designed and tested to meet or exceed applicable ISTA and ASTM standards. Volume finished drives will be shipped from Seagate factories on pallets to minimize freight costs and ease material handling. Seagate finished drive bulk packs may be shipped individually. For less than full shipments, instructions are printed on the bulk pack carton for minimum drive quantities and proper drive placement.

Figure 9. Recommended mounting

Note. Image may not represent actual product, for reference only.

Pulsar XT.2 SAS Product Manual, Rev. B

31

Image 39

Contents Standard Models Self-Encrypting Drive Models ST400FX0002ST400FX0012 ST200FX0002 ST100FX0002Revision history Contents About self-encrypting drives Physical/electrical specificationsDefect and error management InstallationPage Pulsar XT.2 SAS Product Manual, Rev. B List of Figures Page Seagate Online Support and Services Seagate Technology support servicesScope Electromagnetic susceptibility Applicable standards and reference documentationStandards Electromagnetic compatibilityKorean KCC Electromagnetic complianceElectromagnetic compliance for the European Union Australian C-TickChina Restriction of Hazardous Substances RoHS Directive Reference documentsGeneral description Standard featuresMedia description PerformanceReliability Factory-installed options Formatted capacitiesProgrammable drive capacity Thin Provisioning Drive Configuration Access time Performance characteristicsInternal drive characteristics Performance characteristicsPerformance Format Mode Dcrt Bit IP Bit 400GB 200GB 100GBStart/stop time Cache controlCaching write data Error rates Reliability specificationsEndurance Management Lifetime Endurance Management Reliability and servicePreventive maintenance Data RetentionPerformance impact Maximum processing delay Fully-enabled delay4 S.M.A.R.T Controlling S.M.A.R.TThermal monitor Predictive failuresImplementation State of the drive prior to testingDrive Self Test DST DST failure definitionLog page entries Short and extended testsShort test Function Code 001b Extended test Function Code 010bStorage Product warrantyShipping Product repair and return informationPhysical/electrical specifications Power specificationsAC power requirements 400GB standard model DC power requirements DC power requirements200GB standard model DC power requirements 100GB standard model DC power requirements Current profiles General DC power requirement notesPower sequencing Conducted noise immunityCurrent profiles for 200GB models Power dissipation 400GB models in 6Gb operation200GB models in 6Gb operation Temperature a. Operating Environmental limits100GB models in 6Gb operation Relative humidity Effective altitude sea level a. OperatingShock and vibration Recommended mounting ShockAir cleanliness Vibration a. Operating-normalCorrosive environment Mounting configuration dimensions 400GB models Mechanical specificationsWeight Pounds 100 grams Data encryption Controlled accessAdmin SP About self-encrypting drivesData bands Default passwordRandom number generator RNG Drive lockingCryptographic erase Authenticated firmware downloadPower requirements Supported commandsDefect and error management Drive internal defects/errorsSSD Physical format address descriptor Bit Byte Auto-Reallocation Drive error recovery proceduresSAS system errors Background Media ScanIdentifying a Protection Information drive Setting and determining the current Type LevelProtection Information PI Levels of PIDrive orientation InstallationAir flow CoolingGrounding Drive mountingInterface requirements SAS featuresDual port support Supported commands Scsi commands supportedPersistent Reserve Read Capacity Write Inquiry data Mode Sense dataPage 14 1a 00 1a Mode Sense data for 400GB drivesMode Pages Mode Sense data for 200GB drivesMode Sense values for 100GB drives SAS physical interface Miscellaneous operating features and conditionsMiscellaneous features Miscellaneous statusDatum B Section C C Section a a Pin descriptions Physical characteristicsConnector requirements Electrical descriptionReady LED Out Signal characteristicsPower SAS transmitters and receiversGeneral interface characteristics SAS-2 Specification complianceLED drive signal Differential signalsNumerics IndexPage RNG See also cooling Page Americas Seagate Technology LLC