Western Telematic NPS-2HD manual Mrmaio, Displaying Plug Status

Page 34

NPS-2HDHeavyDutyNetworkPowerSwitch;User'sGuide

6.2. Displaying Plug Status

The Status Screen displays the On/Off state and selected parameters for the switched plugs. To display the Status Screen, type /S and press [Enter]. Note that although the /S command is available in both User and System Mode, the System Status Screen includes more information than the User Status Screen.

When the System Mode is active, the /S command will produce the screen shown in Figure 6.1, which lists status and parameters for both switched plugs, along with Console Port parameters, and modem command strings. Note that in System Mode, the /S command will also accept an argument which will display the User Password for each plug. To display plug passwords, access the Syst m Mode, type /SP and press [Enter]

Mrmaio

Status

(defined)

When the User Mode is active,

he /S command will produce a

different version of the atus screen, which lists the status and paramet s only for the plug(s) owned by the User password entered at login. If a separate User Password has been assigned

to the ther plug, the User Mode St tus Scre

will not list the

status for

hat plug. In User mode, plug passwords cannot be

 

ON15Sec--------FFMinSite:+------------WESTERNBootDelayPasswordTELEMATIC,+------------------INC.

+-------ONDefault--

ACommadDiscoMdemNetworkPlug------displayed21omatonuicaiInit+DiscROUTERe------------------ConfEhPowrSwitchv1Nam.TmeoueString:de:.SePOWERt:ngs:BA.00+9600,N,8,130+++ATZATEM0Q1&C1&D2S0=1

 

 

 

ButMod:

O

 

Figure"/H"for6.1:HelpSystemStatusScreen(PasswordsHidden)

 

6-2

 

 

Page 33 Page 35
Image 34
Page 33 Page 35
Contents NPS-2HD Page Nameplate Power Warning Rack Mount InstallationDisconnect Power VentilationCable OptionSwichesNetwokCable SystemModeOnly Intelligent Power Control IntroductionTypographic Conventions Unit Description Front PanelBack Panel Circuit Breaker 115 VAC, 20 AmpsQuick Start Guide Page QuickStartGuide NPS-2HDHeavyDutyNetworkPowerSwitchUsersGuide Power Connection InstallationCable Clamp Installation 1OutputCableClampInstallation Output Cable ClampInstallation Input Cable ClampOption Switches Disconnect TimeoutDefault Button / Reset Button Local Reset Unit to DefaultsDefault Parameters Option Connecting the Network Cable Connecting an External ModemConsole Port Connection Configuration System Mode and User ModeCommunicating with the NPS =AllPlugswithAccess NPS Command/Menu Conventions Defining General ParametersButtonMode NPS-2HDHeavyDutyNetworkPowerSwitchUsersGuide Configuration Plug ParametersPage 00-40-05-5e-f3-90 Network ParametersImplementing IP Security Configuration Save Configuration Parameters Access the NPS-2HD Command Mode OperationMrmaio Displaying Plug StatusBoot/On/Off Commands OperationOFF POWER2 or /OF POWER2 and press Enter Default Command Automated ModeNPS-2HDHeavyDutyNetworkPowerSwitchUsersGuide Reset Network Port Other CommandsLogin as Different User Exit / DisconnectManual Operation Operating TipsSaving and Restoring Configuration Parameters Sending Parameters to a FileRestoring Saved Parameters Interface Descriptions Console Port InterfaceApx-2 Modem Port InterfaceSpecifications Input Connector IEC-320-C19 InletCustomer Service Apx-4Appendices Trademark and Copyright InformationApx-6 4-6 FrontactoryPanSttigsAddresslIndicators.FIndex 4-6,6-8 OnsolePortANameOwnrship PowerInlet58,643
Top Page Image Contents