Western Telematic NPS-2HD manual Saving and Restoring Configuration Parameters

7.Saving and Restoring Configuration Parameters

After the NPS-2HD has been properly configured, parameters can be downloaded and saved as an ASCII text file. Later, if the configuration is accidentally altered, the file with the saved parameters can be uploaded to automatically reconfigure the unit without the need to manually assign each parameter.

Saved parameters can also be uploaded to other NPS-2HD units. This allows rapid set-up when several units will be configured with the same parameters.

The "Save Parameters" procedure can be performed from any terminal emulation program (e.g. ProComm, Crosstalk, Hyperterminal, etc.), which allows downloading of ASCII files.

7.1.Sending Parameters to a File

1.Start your communications program and access the NPS-2HD command mode using the System Level Password.

2.When the NPS command prompt appears, type /DL and press [Enter]. The NPS will prompt you to prepare your communications program. Set up your communications program to receive an ASCII download, and specify a name for the file that will receive the saved parameters (e.g. NPS.PAR).

3.When the communications program is ready to receive the file, return to the NPS command mode, and press [Enter] to proceed.

4.The NPS will send a series of ASCII command lines which