Westinghouse MA7200 Plus quick start manual Press Key Key 4 times

Page 11

MA7200 PLUS Inverter 1 to 2 HP PID Fan and Pump Quick Start Manual

__________________________________________________________________

	(Engineering Units)
1 - Press the	key
2 - Press the	key 4 times
			Flashing
3 - Press the	key		0
			Flashing
4 - Press the	key twice		2
4 - Press the	key twice
5 - Press the	key to	.	2 Seconds
5 - Press the	key to	.
			Flashing
			2

Note: Once P1-01 is set to a non-zero value, then Cn-28 is no longer valid.

________________________________________________________________ 11

TECO – Westinghouse Motor Company

Image 11

Contents MA7200 Plus Inverter Before Starting the Inverter PID Quick Start Guide for Fan and Pump ApplicationsCheck Fan or Pump Motor Operation Apply Power to the DriveSet Drive to Run Mode Teco Westinghouse Motor Company Digital Input / Output terminal connections Analog Feedback terminal connections Select Start / Stop Method of Control Sn-04 To set parameter Cn-19 = 050% Setting Minimum Speed in Pump ApplicationsTurn on PID control Select Feedback Engineering Units P1-01 and Scaling P1-02 To set the parameter Sn-24 =Press Key Key 4 times Maximum value of Engineering Units To set parameter Bn-17 = Word About PID Control To set parameter Bn-18 =To set parameter Bn-01 = 30.0 s To set parameter Bn-02 =30.0 P1-02=0200 Set parameter P1-04 = Press Key Sleep wakeup Level Press the key twice then the key Key Testing The System MA7200 Plus Block DiagramTeco Westinghouse Motor Company Appendix a