Westinghouse MA7200 Plus quick start manual Press Key

Page 19

MA7200 PLUS Inverter 1 to 2 HP PID Fan and Pump Quick Start Manual

__________________________________________________________________

(Sleep Start Level Delay Time)

1 - Press the key twice; then the key

Flashing

2 - Press the	key		0
2 - Press the	key
			Flashing
3 - Press the	key twice; then the	key	1
3 - Press the	key twice; then the	key
			Flashing

4 - Press the	key ; then the	key	0

5 - Press the key to .

0

2Seconds

Flashing

________________________________________________________________ 19

TECO – Westinghouse Motor Company

Image 19

Contents MA7200 Plus Inverter Before Starting the Inverter PID Quick Start Guide for Fan and Pump ApplicationsSet Drive to Run Mode Apply Power to the DriveCheck Fan or Pump Motor Operation Teco Westinghouse Motor Company Digital Input / Output terminal connections Analog Feedback terminal connections Select Start / Stop Method of Control Sn-04 To set parameter Cn-19 = 050% Setting Minimum Speed in Pump ApplicationsTurn on PID control Select Feedback Engineering Units P1-01 and Scaling P1-02 To set the parameter Sn-24 =Press Key Key 4 times Maximum value of Engineering Units To set parameter Bn-17 = Word About PID Control To set parameter Bn-18 =To set parameter Bn-01 = 30.0 s To set parameter Bn-02 =30.0 P1-02=0200 Set parameter P1-04 = Press Key Sleep wakeup Level Press the key twice then the key Key Testing The System MA7200 Plus Block DiagramTeco Westinghouse Motor Company Appendix a