Speed copper (Switch 5)
Switch Position | Copper port 1 | Copper port 2 |
|
|
|
Up (default) | 100 | NA |
|
|
|
Down | 10 | NA |
|
|
|
Note When Auto Negotiation (SW1) is set to Off, the media converter will use this switch setting for copper port 1 speed.
100:When Switch 5 is in the Up position, the
10:When Switch 5 is in the Down position the media converter will force the speed to 10 Mbps.
Auto Fiber Negotiation (Switch 6)
Switch | Fiber 1 | Fiber 2 |
Position | 1000 Mbps | 1000 Mbps |
Up (default) | Auto | Auto |
|
|
|
Down | Off | Auto |
|
|
|
Auto: The Media Converter will negotiate Ethernet parameters on the fiber connection. This will ensure that the most optimal connection parameters will be in effect. If connecting to another Perle Media Converter, this parameter should be set to Auto. The Media Converter Module will advertise 1000Mbps, Full and Half Duplex, no Pause.
Off: The Media Converter Module’s fiber will be fixed to 1000Mbps, Full Duplex.
Note: Fiber port 2 is always set to Auto.
When using a 100 Mbps SFP module Full/Half Duplex on Fiber (Switch 6)
Switch | Fiber 1 | Fiber 2 |
Position | 100 Mbps | 100 Mbps |
Up (default) | Full Duplex | Full Duplex |
|
|
|
Down | Half Duplex | Full Duplex |
|
|
|
12 | Perle PoE/PoE+ 10/100/1000 Ethernet Media Converter |
| Installation Guide |