Perle Systems S-1110DPP, S-1110PP manual No Power to the PD

Page 23

converter. At the remote media converter, the data will be looped back and passed through the fiber, back to the local converter and passed to the copper link.

No Power to the PD

1.Ensure that the PD is compatible with the S-1110P. If the PD is a POE+ device, a POE+ media converter must be used. (S-1110PP)

2.Ensure that the power supply being used, is the one provided with the product

3.If the PD does not support Alternative A (including legacy PD’s), the Power Option Jumpers must be set accordingly. Also ensure the correct pin out for the device.

4.For proper detection of different classes of devices, the dip switches must be set correctly.

Perle PoE/PoE+ 10/100/1000 Ethernet Media Converter	23
Installation Guide

Image 23

Contents 1110P 1110PP 1110DP 1110DPP Installation GuidePort Models OverviewDual Copper / PoE DP Connector Mode Wavelength Port Models SFP Port Models SPFAuto-MDIX Jumper Settings InstallationPoE+ Power Sourcing PinoutsUTP copper Power PoEPowering Options Jumper Settings Bank DIP SwitchesBank Switch Position Copper DIP Switch Settings BankAuto Negotiation copper Switch Link Mode SwitchSwitch Position Fiber Port Fiber Fault Alert SwitchIllustration of the FFA Duplex copper SwitchSwitch Position Copper port Switch Fiber Position Mbps Up default Auto Down Off Speed copper SwitchAuto Fiber Negotiation Switch Switch Position 1 Switch Position 2 Type Loopback Fiber-1 Switch Loopback Fiber-2 SwitchSwitch Position Mode Redundant Primary Switch Fiber Redundancy Switch Dual fiber models onlyInstalling the Simplex Fiber Cable Installing the SFP Fiber ModuleInstalling the Duplex Fiber Cable Attaching the Grounding Lug Installing the Copper CableGrounding the Media Converter Attaching the Power cord strain relief clip Powering up the Perle Media ConverterLED Pattern OperationStatus LED Error conditions Pause Ieee 802.3xy Other FeaturesAuto-MDIX Method TroubleshootingGeneral No connectivityNo Power to the PD Fiber Optic Specifications Technical Specifications1110PP-S1SC120U Min Ethernet Copper Cabling Requirements Fiber Cabling RequirementsCompliance Information EN 55022, Class a EN 55024, Class a Laser Safety IECCopyright Warranty / RegistrationContacting Technical Support