Perle Systems S-1110PP, S-1110DPP manual Powering up the Perle Media Converter

Page 18

2.Attach the grounding lug to the chassis and secure with the grounding screw(s).

Attaching the Power cord strain relief clip

1.Feed the power cord through the opening in the power cord relief clip.

2.Attach the power cord relief clip to the chassis and secure with the provided screw.

3.Plug the power cord into the AC power connector at the rear of the chassis.

4.Plug the other end of the power cord into an appropriate power outlet.

Powering up the Perle Media

Converter

1.Connect the Perle supplied power adapter to the media converter.

2.Connect the power adapter to a power source.

3.Check that the PWR LED light is lit.

18	Perle PoE/PoE+ 10/100/1000 Ethernet Media Converter
	Installation Guide

Image 18

Contents Installation Guide 1110P 1110PP 1110DP 1110DPPOverview Port ModelsDual Copper / PoE DP Connector Mode Wavelength Port Models SPF Port Models SFPInstallation Auto-MDIX Jumper SettingsPoE Power Sourcing PinoutsUTP copper Power PoE+Powering Options Jumper Settings DIP Switches BankBank Link Mode Switch DIP Switch Settings BankAuto Negotiation copper Switch Switch Position CopperFiber Fault Alert Switch Switch Position Fiber PortDuplex copper Switch Switch Position Copper portIllustration of the FFA Speed copper Switch Auto Fiber Negotiation SwitchSwitch Fiber Position Mbps Up default Auto Down Off Loopback Fiber-1 Switch Loopback Fiber-2 Switch Switch Position 1 Switch Position 2 TypeSwitch Position Mode Fiber Redundancy Switch Dual fiber models only Redundant Primary SwitchInstalling the SFP Fiber Module Installing the Duplex Fiber CableInstalling the Simplex Fiber Cable Installing the Copper Cable Grounding the Media ConverterAttaching the Grounding Lug Powering up the Perle Media Converter Attaching the Power cord strain relief clipOperation Status LEDLED Pattern Error conditions Other Features Auto-MDIXPause Ieee 802.3xy No connectivity TroubleshootingGeneral MethodNo Power to the PD Technical Specifications Fiber Optic Specifications1110PP-S1SC120U Min Fiber Cabling Requirements Ethernet Copper Cabling RequirementsEN 55022, Class a EN 55024, Class a Laser Safety IEC Compliance InformationWarranty / Registration Contacting Technical SupportCopyright