Perle Systems S-1110PP, S-1110DPP manual Overview, Port Models

Page 2

Overview

This document contains instructions necessary for the installation and operation of the Perle Standalone PoE/PoE+ 10/100/1000 rate converting Media Converters (S-1110P). These products have the ability to convert 10/100/1000Base-T cable connections (copper) to 100/1000Base-X connections (fiber). The Perle media converters function as a PoE switch, and support a variety of port configurations, including single or dual UTP and fiber ports. These media converters function as Power Sourcing Equipment (PSE) and can power either one or two Powered Devices (PDs) using standard UTP cables that carry Ethernet data. The S-1110P models are compatible with Powered Devices that comply with the IEEE 802.3af standard and the S-1110PP models are compatible with Powered Devices that comply with both the IEEE 802.3af and the 802at-2009 standard. The fiber connection can be either single mode (SM) or multimode (MM) and can operate over different wavelengths and distances, depending on the model selected (see table below).

2 Port Models

 

PoE (P)

 

 

Connector

 

 

Mode

 

 

Wavelength

 

 

PoE+ (PP)

 

 

(xx)

 

 

Distance

 

 

(TX/RX)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

S-1110P-M2xx05

 

SC/ST

 

MM

 

850 nm

 

S-1110PP-M2xx05

 

 

550 m/1804 ft.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

S-1110P-S2xx10

 

 

SC/ST

 

 

SM

 

 

1310 nm

 

 

S-1110PP-S2xx10

 

 

 

 

10 km/6.2 mi.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

S-1110P-S1SC10U

 

SC

 

SM

 

1310/1490 nm

 

S-1110PP-S1SC10U

 

 

10 km/6.2 mi.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

S-1110P-S1SC10D

 

 

SC

 

 

SM

 

 

1490/1310 nm

 

 

S-1110PP-S1SC10D

 

 

 

 

10 km/6.2 mi.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

S-1110P-S1SC20U

 

SC

 

SM

 

1310/1490 nm

 

S-1110PP-S1SC20U

 

 

20 km/12.4 mi.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

S-1110P-S1SC20D

 

 

SC

 

 

SM

 

 

1490/1310 nm

 

 

S-1110PP-S1SC20D

 

 

 

 

20 km/12.4 mi.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

S-1110P-S2xx40

 

SC/ST

 

SM

 

1310 nm

 

S-1110PP-S2xx40

 

 

40 km/25 mi.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

S-1110P-S1SC40U

 

 

SC

 

 

SM

 

 

1310/1490 nm

 

 

S-1110PP-S1SC40U

 

 

 

 

40 km/25 mi.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

S-1110P-S1SC40D

 

SC

 

SM

 

1490/1310 nm

 

S-1110PP-S1SC40D

 

 

40 km/25 mi.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

S-1110P-S2xx70

 

 

SC/ST

 

 

SM

 

 

1550 nm

 

 

S-1110PP-S2xx70

 

 

 

 

70 km/43.5 mi.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2

Perle PoE/PoE+ 10/100/1000 Ethernet Media Converter

 

Installation Guide

Image 2
Contents Installation Guide 1110P 1110PP 1110DP 1110DPPOverview Port ModelsDual Copper / PoE DP Connector Mode Wavelength Port Models SPF Port Models SFPInstallation Auto-MDIX Jumper SettingsPoE Power Sourcing PinoutsUTP copper Power PoE+Powering Options Jumper Settings Bank DIP SwitchesBank Link Mode Switch DIP Switch Settings BankAuto Negotiation copper Switch Switch Position CopperFiber Fault Alert Switch Switch Position Fiber PortIllustration of the FFA Duplex copper SwitchSwitch Position Copper port Switch Fiber Position Mbps Up default Auto Down Off Speed copper SwitchAuto Fiber Negotiation Switch Loopback Fiber-1 Switch Loopback Fiber-2 Switch Switch Position 1 Switch Position 2 TypeSwitch Position Mode Fiber Redundancy Switch Dual fiber models only Redundant Primary SwitchInstalling the Simplex Fiber Cable Installing the SFP Fiber ModuleInstalling the Duplex Fiber Cable Attaching the Grounding Lug Installing the Copper CableGrounding the Media Converter Powering up the Perle Media Converter Attaching the Power cord strain relief clipLED Pattern OperationStatus LED Error conditions Pause Ieee 802.3xy Other FeaturesAuto-MDIX No connectivity TroubleshootingGeneral MethodNo Power to the PD Technical Specifications Fiber Optic Specifications1110PP-S1SC120U Min Fiber Cabling Requirements Ethernet Copper Cabling RequirementsEN 55022, Class a EN 55024, Class a Laser Safety IEC Compliance InformationCopyright Warranty / RegistrationContacting Technical Support