Omnitron Systems Technology user manual Access the 10/100M2 Remotely

Page 20

3.4.4Access the 10/100M2 Remotely

Remote access to the 10/100M2 is provided via SNMP, Telnet, FTP or an external serial modem connected to the Serial Console Port.

3.4.4.1Accessing the 10/100M2 via NetOutlook (SNMP)

The 10/100M2 module can be remotely accessed by SNMP-client software such as NetOutlook or third- party SNMP management software. See Setting SNMP Preferences Section 3.4.2, on how to configure the required parameters.

NetOutlook Chassis View and Trap Log Screens

3.4.4.2Accessing the 10/100M2 via Telnet

The 10/100M2 is shipped from the factory with Telnet enabled. The default Telnet password is “public”. It is highly recommended that the network administrator set a new Telnet password in order to prevent unauthorized access to the unit. Telnet configuration parameters are available from the IP and Control Preferences screen, option 6.

Page 20

Image 20

Contents Standalone and PLUG-IN Module Table of Contents Overview SA Standalone Plug-InPort Structure Installation Procedure B B B B B B BConfiguring DIP-SWITCHES 1.2 SW2 Fiber Full/Half-Duplex FDX/HDX 1.5 SW5 UTP Full/Half Duplex FDX/HDX These DIP-switches are for factory use only Installing PLUG-IN Modules and Connecting Cables Passwords Management Options screen will be displayed Setting IP and Control Preferences Setting the Chassis Number and Name Setting 10/100M2 Passwords Setting Snmp Preferences Setting SNMPv1/v2c Read and Write Community Names Setting the Snmp Trap IP Host Addresses Enabling/Disabling Soft-switch Reload Access the 10/100M2 Remotely Updating the 10/100M2 Firmware via the Serial Console Port Verify Operation Detailed Module Configuration NMM8919N-0 10/100M2 UTP HDX UTP FDX LEDModule Management Mode Port Configuration UTP To change the ingress rate of the UTP port, select option SFP Information A167EC500000 5 802.3ah Parameters Page OUI Port Vlan Page Tagged Vlan BP B PvidVlan Table is Empty Vlan ID VIDUTP BP a BP B Vlan ID +1 Vlan ID CNode Loopback To refresh the Port Statistic screen, press Enter 10/100M2 Specifications Cable TypesTroubleshooting Guide Possible CausesUTP Issues Warranty Limitation of Warranty