Once all the VLAN IDs have been assigned, select option 7 or 5 to submit the entries.
PI
VLAN Membership - iConverter 10/100M2 |
| iConverter, Serial Agent | |||||
Identifier - |
|
|
|
|
|
|
|
Chassis Number = 1 | Slot Number = 1 | Model Number = |
| ||||
| VLAN ID (VID) | Fiber | UTP | BP A | BP B | Mngmnt | |
1: | 100 |
| Yes | No | No | No | No |
Add new entry (a), Delete entry (d), Edit entry (e), Clear table (c)
Enter Choice, Previous Screen(0), (H)elp, E(x)it >
The VLAN membership entries are saved from the Port configuration screen, option 4.
4.3.10cNode Loopback
The 10/100M2 has implemented Iometrix cNode Level 1 agent for testing performance metrics. The agent recognizes measurement packets and loops them back to the sending cNode device. Iometrix cNode equipment is required to obtain performance metrics.
cNode configuration is accessed by selecting option 10 from the Port configuration screen.
PI
SA
cNode Control | iConverter, Serial Agent | |
Identifier - |
|
|
Chassis Number = 1 | Slot Number = 2 | Model Number = |
1: | cNode | Loopback | Disabled |
2: | cNode | Rate Limit | 64 Kbps |
Enter Choice, Previous Screen(0), (H)elp, E(x)it >
From the menu, loopback can be enabled or disabled and the rate limit can be selected.
Page 42