Omnitron Systems Technology 10/100M2 user manual Oui

802.3ah parameters can be accessed by selecting options 5 from the Port configuration screen. The fiber (port 1) configuration screen is displayed.

PI

SA

802.3ah Control - iConverter 10/100M2			iConverter, Serial Agent
Identifier -
Chassis Number = 1	Slot Number = 1		Model Number = 8919N-0	Port # = 1
1: 802.3ah OAM State		Enabled	Local Status
2: OAM Mode		Active	Discovery State	In Process
3: Loopback Mode		Disabled	Multiplexer State	Forward
4: Loopback Timeout		30 sec	Parser Action	Forward
5: Unidirectional Mode		Enabled
			Remote Status
			Discovery State	Incomplete
			Critical Event	No
			Link Fault	No
			Multiplexer State	Unknown
			Parser Action	Unknown
			Mode	Unknown
			Supports	Unknown
			OUI:	Unknown

Enter, Previous Screen (0), (n)ext page, (H)elp, E(x)it >

To configure the 802.3ah parameters for the UTP port, type an n and press <ENTER>.

4.3.6802.3ah Events

802.3ah events can be accessed by selecting options 6 from the Port configuration screen.

PI

SA

802.3ah Event - iConverter 10/100M2			iConverter, Serial Agent
Identifier -
Chassis Number = 1	Slot Number = 1	Model Number = 8919N-0
Port 1
1: Symbol Period Window		0	second	<	0	symbols>
2: Symbol Period Threshold		0	symbols
3: Frame Window		0	seconds
4: Frame Threshold		0	frames
5: Frame Period Window		0	second	<	0	frames>
6: Frame Period Threshold		0	frames
7: Frame Seconds Summary Window		0	seconds
8: Frame Seconds Summary Threshold		0	seconds
Port 2
9: Symbol Period Window		0	second	<	0	symbols>
10: Symbol Period Threshold		0	symbols
11: Frame Window		0	seconds
12: Frame Threshold		0	frames
13: Frame Period Window		0	second	<	0	frames>
14: Frame Period Threshold		0	frames
15: Frame Seconds Summary Window		0	seconds
16: Frame Seconds Summary Threshold		0	seconds

Enter Choice, Previous Screen(0), (H)elp, E(x)it >

Page 34