NXP Semiconductors PCA2125, PCF85x3 Legal information, Definitions, Disclaimers, Trademarks

Page 51

NXP Semiconductors

UM10301

 

User Manual PCF85x3, PCA8565 and PCF2123, PCA2125

21. Legal information

21.1 Definitions

Draft — The document is a draft version only. The content is still under internal review and subject to formal approval, which may result in modifications or additions. NXP Semiconductors does not give any representations or warranties as to the accuracy or completeness of information included herein and shall have no liability for the consequences of use of such information.

21.2 Disclaimers

General — Information in this document is believed to be accurate and reliable. However, NXP Semiconductors does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information.

Right to make changes — NXP Semiconductors reserves the right to make changes to information published in this document, including without limitation specifications and product descriptions, at any time and without notice. This document supersedes and replaces all information supplied prior to the publication hereof.

Suitability for use — NXP Semiconductors products are not designed, authorized or warranted to be suitable for use in medical, military, aircraft, space or life support equipment, nor in applications where failure or malfunction of a NXP Semiconductors product can reasonably be expected to result in personal injury, death or severe property or environmental damage. NXP Semiconductors accepts no liability for inclusion and/or use of NXP Semiconductors products in such equipment or applications and therefore such inclusion and/or use is for the customer’s own risk.

Applications — Applications that are described herein for any of these products are for illustrative purposes only. NXP Semiconductors makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification.

21.3 Trademarks

Notice: All referenced brands, product names, service names and trademarks are property of their respective owners.

UM10301_1

 

© NXP B.V. 2008. All rights reserved.

User manual

Rev. 01 — 23 December 2008

51 of 52

Image 51
Contents Info Content Keywords Document informationAbstract Rev Date Description Contact informationNXP Semiconductors Revision historyIntroduction Features Address Register name Bit Register overview PCF8563Comparison Event counter modeComparison of six real time clocks FeaturesPower-on reset POR Power-on resetVoltage-low detector Oscillator Voltage-low detectionOscillator-stop detection Overview of internal and external oscillator capacitors Pierce Oscillator equivalent diagramOscillator frequency determining components UM10301 + C Parameter Value Unit Source Typical values for crystal and surrounding capacitorsOscillation allowance Using an external oscillatorCrystal and crystal selection Modes which don’t work Effect of temperature− f nom Capacitors and capacitor selection Accuracy Influences on time accuracy Oscillator tuning Oscillator tuning 10.1 PCF2123 Offset register Daylight Saving Time DST Century and leap year, Daylight Saving TimeCentury tracking Year and leap year trackingInitialization and setting of alarm and timer Initialization of the RTC and setting the timeBlock Diagram PCF8563 Register Comments Address AlarmSetting the alarm Binary BCDAlarm function Setting the timer Setting the timerRegister Lithium Primary cells Backup power supplyBackup circuit using primary lithium cell NiCd and NiMH secondary batteries Backup circuit using secondary cell NiCd or NiMH13.3 Capacitors Charging the backup capacitor BAS716 BAS116 BAV170 Diode selectionSome suggestions for diode D1 1N4148PCB layout guidelines PCB layout proposal for PCF8563 using leaded components Partial circuit switch down Protection diodes Hints to keep power consumption low0007 Rpmax as a function of bus capacitance 8473 ⋅ C bApplication diagram 2, SPI interface Application diagram 1, I2C-bus interfaceGeneral countdown timer behaviour First period inaccuracy when using the timerTimer delays Timer Source clock frequency Delay for n =Timer source clock Minimum timer period Maximum timer period First period delay for timer counter value nTiming requirements for I2C read and write I2C interface Block diagram I2C interface and Time countersSequence of events example Read Oscillator startup time Checking for oscillation TroubleshootingNo communication via I2C-bus Wrong time and date, wrong clock speed ReferencesTrademarks Legal informationDefinitions DisclaimersContents