Net Optics none manual Specifications, DNM, Environmental, Certifications, Available Models

Page 45

Director

Specifications, DNM

Copper Interface

(12) RJ45 Network Ports 10/100/1000Mbps

(6) In-line links or (12) Span ports depending on model

22-24 AWG unshielded twisted pair cable, CAT5e or better recommended

Fiber Optic Interface

(12) Gigabit SX, LX, or ZX Network Ports, LC type

(6) In-line links or (12) Span ports depending on model Fiber Types: Corning Multimode 62.5/125μm

Corning Multimode 50/125μm

Corning Singlemode 8.5/125μm

Transceiver: SX GigaBit 850nm, VCSEL, supports 62.5/125μm

SX GigaBit 850nm, VCSEL, supports 50/125μm

LX GigaBit 1310nm, laser, supports 8.5/125μm

ZX GigaBit 1550nm, laser, supports 8.5/125μm

Safety: Class 1, eye-safe, laser emitter type; conforms to the applicable requirements per US 21 CFR (J) and EN 60825-1; also UL 1950 applications

Environmental

Operating Temperature: 0˚C to 55˚C

Storage Temperature: -10˚C to 70˚C

Relative Humidity: 10% min, 95% max, non-condensing

Certifications

FCC, CE, FCC, VCCI, C-Tick, and WEEE certified

Fully RoHS compliant

Available Models

Models, Main Chassis

DIR-3400

Director Main Chassis with 10 SFP monitor ports

DIR-____

Director Main Chassis with 10 SFP monitor ports, -48VDC power

DIR-7400

Director Main Chassis with 10 SFP monitor ports, 2 XFP 10GbE ports, 2 XFP uplink ports

DIR-____

Director Main Chassis with 10 SFP monitor ports, 2 XFP 10GbE ports, 2 XFP uplink ports, -48VDC

DNMs

power

6-Port 10/100/1000 Copper In-Line Module

DNM-100

DNM-110

12-Port 10/100/1000 Copper Span Module

DNM-200

6-Port Gigabit SX Fiber 62.5μm In-Line Module

DNM-210

12-Port Gigabit SX Fiber 62.5μm Span Module

DNM-220

6-Port Gigabit SX Fiber 50μm In-Line Module

DNM-230

12-Port Gigabit SX Fiber 50μm Span Module

DNM-300

6-Port Gigabit LX Fiber In-Line Module

DNM-310

12-Port Gigabit LX Fiber Span Module

DNM-320

6-Port Gigabit ZX Fiber In-Line Module

DNM-330

12-Port Gigabit ZX Fiber Span Module

41

*** Confidential - DO NOT Distribute ***

Image 45
Contents Smart Filtering Appliance Trademarks and Copyrights Contents Appendix B Appendix aAppendix C Filter parametersChapter Introduction Ease of Use Key FeaturesMonitor port Filtering Passive, Secure TechnologyDescription About this GuideDirector internal architecture Director ArchitectureDirector Management USB portNetwork Links Typical ApplicationMonitoring Tools IBypass Switch Method In-line Monitoring of 10 Gigabit LinksExternal Network Tap method Director Front Panel Power LEDsMonitor Port LEDs DNM / Network Port LEDsXFP Director Rear PanelChapter Installing Director Unpack and Inspect the Director device Plan the InstallationInstall Director Network Modules Install SFP and XFP Monitor port ModulesRack Mount the Director device Connect the local CLI Interface Connect Power to DirectorBaud Data bits No parity 1 stop bit No flow control Connect the remote CLI InterfaceTip To connect the CLI for remote use over the Management portTo log into the CLI Log into the CLIConfigure Director using the CLI Change Director User Name and PasswordTo change the user name and password Assign a New Manager IP Address To change the port modeTo assign a new Manager IP address to Director Change Port ModesSet the Current Date and Time Save and Load Director ConfigurationsTo view CLI help information Using the CLI Help CommandCurrent config file Using the CLI Command History BufferTo connect a Span port Connect Span Ports to DirectorTo connect an in-line network link Connect Director With In-line Network LinksConfigure a Matrix Switch connection in Director Check the InstallationConnect Monitoring Tools to Director Syntax Chapter Configuring Filters Using the CLICopy Traffic From Any Network Port to Any Monitor Port Enter filter commit. The switch connection is activatedLter add inports=n1.1 action=redir redirports=m.3-m.5 Regenerate Traffic to Any Set of Monitor PortsTo create a filter that selects IPv4 packets by protocol Create FiltersLogical and filter connection Create Complex FiltersUDP View filtersConfigurable 10 Gigabit XFP ports used as Network ports Work with configurable 10 Gigabit portsNetwork Port 11 XFP Port CAM Understand filter interactionsFlow diagram now looks as follows N1.1 ipproto=UDP action=drop N1.1 m.1 Exclusive filtersUnderstand pending and active filters To change the Director filter configurationEnter filter list to view the pending filter list Filter capacity User interactionsDaisy-chaining Multiple Director Chassis Specifications, chassis Appendix a Director SpecificationsEnvironmental Specifications, DNMCertifications Available ModelsCommand Sub-Command Parameters Example and description Appendix B Command Line InterfaceFilter add and filter ins commands Command may includeFilter add ipv6=n inports=n1.1-n1.3 ip Src=10.1.1.1 action=dropFilter list Load myconfiguration-1Filter running Filter syncShow myconfiguration-1 Save myconfiguration-1Passwd PingSysip ipaddr=192.168.1.2 netmask=255.255.0.0 Sysip commitSysip show TimeUser show This This command is only available at root level CommandUser add name=bob pw=bob-pw priv=3 Is onlyDirector Filter Parameters Qual Value Example Description Filter parametersNum Keyword Protocol Appendix C Protocol NumbersMobile L2TP Limitations on Warranty and Liability By Net Optics, Inc. All Rights Reserved