5-3. Overload Protection
3
If fuse F1 opens, the robot interface shuts down. To check or change F1, proceed as follows:
1Fuse Holder Cover
2Fuse F1 (See Parts List For Rating)
3Circuit Breaker CB1
CB1 protects the wire feed motor from overload. If CB1 opens, the wire feed motor stops. Check for jammed wire, binding drive gear, or misaligned drive rolls. Correct problem.
Allow cooling period and manually reset breaker.
12
Push And Turn | Pull Out And | Push And Turn |
| Replace F1 |
|
Ref.