Multi-Tech Systems MT5600BA-V92 manual Technical Specifications, Modem Compatibility

Page 6

Chapter 1 – Product Description and Features

Technical Specifications

Your MultiModem II modem meets the following specifications:

Trade Name

MultiModemII

Model Number

MT5600BA-V92

Server-to-Client

V.92/56K speeds when accessing a V.92 server

Data Rates

(actual speed depends on server capabilities and line conditions)

Client-to-Client

33600, 31200, 28800, 26400, 24000, 21600, 19200, 16800,

Data Rates

14400, 12000, 9600, 7200, 4800, 2400, 1200, 0-300 bps

Fax Data Rates

14400, 12000, 9600, 7200, 4800, 2400, 300 bps

Data Format

Synchronous and asynchronous

Commands

AT Commands, V.25bis

Command Buffer

60 characters

Modem Compatibility

V.92, V.90, 56K, V.34 enhanced, V.34, V.32terbo, V.32bis, V.32,

 

V.25bis, V.22bis, V.22; Bell 212A and 103/113; V.42, V.42bis; V.21 &

 

V.23 in international versions, V.44

Fax Compatibility

V.17/14.4K, Group 3, Class 1, 1.0, 2

Error Correction

V.42

Data Compression

V.44 (6:1 throughput), V.42bis, MNP Class 5 (2:1 throughput)

Speed Conversion

Serial port data rates adjustable to 300, 1200, 2400, 4800, 9600, 19200,

 

38400, 57600, 115200, and 230400 bps

Mode of Operation

Fax online modes; full duplex over dial-up and two-wire or four-wire

 

leased lines; data mode, command mode, online command mode, V.54

 

test mode

Flow Control

XON/XOFF (software), RTS/CTS (hardware)

Transmission Level

-11 dBm (dial-up—varies depending on country or region for which the

 

modem is set), -10 dBm (leased-line)

Frequency Stability

±0.01%

Receiver Sensitivity

-43 dBm under worst-case conditions

AGC Dynamic Range

33 dB

Connectors

One DB25F (RS-232C/D) connector; three RJ-11s

Cables

Three modular telephone cords (USA); country- or region-specific

 

cordage for International models; one 9-pin to 25-pin serial cable for

 

International models; external power transformer

 

Note: Any cables connected to the computer should be shielded to

 

reduce interference.

Indicators

32-character backlit LCD for status and configuration information; LEDs

 

for Transmit Data, Receive Data, Carrier Detect, Off Hook, Terminal

 

Ready, and Test Mode

Speaker

1-inch speaker for call progress monitoring

Manual Controls

Power switch, speaker volume control, four LCD control buttons

Multi-Tech Systems, Inc. MT5600BA-V92 User Guide

6

Image 6
Contents MultiModem Revision Date Description Table of Contents Product Description Features FeaturesProduct Description Safety Warnings About AT CommandsTechnical Specifications Modem CompatibilityOperating Temperature Connect the Modem to Your System InstallationTwo-Wire or Four-Wire Leased Line Connection Connect the Modem to Your PCPower-On Test Install the Modem DriverConnect the Modem to the AC Power Outlet Installing the Modem DriverSetting Your Country or Region Code Using the LCD Panel Country or Region CodesUsing the Global Wizard Using AT CommandsInstall PhoneTools Using the Front Panel Modem ConfigurationLED Indicators Liquid Crystal Display LCD Option SelectionStatus Trunk Basic Options Trunk Basic Options Trunk Advanced Options Trunk Advanced Options Trunk Remote Configuration Options Trunk Diagnostic Options TrunkPhone Number Memory Options Trunk Caller ID Options TrunkSetting Country/Region Codes Trunk Caller ID Region SelectFunctionality of Menu Options StatusBasic Options Online OptionsCommand Mode Options Advanced Options RS232 OptionsCallback Security Remote Configuration Options Diagnostic OptionsPhone Number Memory Options Caller ID Options Region Select OptionsTwo-Wire / Four-Wire Setup Leased Line OperationFour-Wire Setup Dial BackupDial Backup and Leased Line Restore Setup Remote Configuration Basic ProcedureSetup Changing the Remote Configuration Password Changing the Remote Escape Character Setup Procedures Callback SecurityTurning Callback Security On and Off Assigning Callback Passwords Front Panel MethodAssigning Callback Phone Numbers Calling Procedure Callback Security Commands Default DescriptionTroubleshooting None of the Indicators LightModem Does Not Respond to Commands Modem Cannot Connect When DialingModem Cannot Connect When Answering Modem Disconnects While OnlineThere Are Garbage Characters on the Monitor File Transfer Is Slower Than It Should BeData Is Being Lost Modem Doesn’t Work with Caller IDAppendix a Regulatory Compliance FCC Part 68 TelecomEMC, Safety, and R&TTE Directive Compliance Canadian Limitations NoticeInternational Modem Restrictions New Zealand Telecom Warning Notice South African NoticeRepair Procedures for U.S. and Canadian Customers Appendix B Warranty, Service, Technical SupportMulti-Tech Warranty Statement Repair Procedures for International CustomersRepair Procedures for International Distributors Replacement PartsIntroduction Upgrade OverviewAppendix C- Upgrading Firmware Identify the Modem FirmwareUpgrade the Modem’s Firmware Download the Upgrade FileExtract the Upgrade Files Clear Your Stored ParametersRestore Your Parameters Using the Modem to Call the Internet Appendix D Installing a Modem Under LinuxInstallation Standard Linux Serial Port DefinitionsCalling the ISP Answering CallsAppendix E Pin Descriptions RS-232 Pin DescriptionsRS-232 Cable Pinouts Leased Line PinoutsWeee Directive Index #DBRegisters
Related manuals
Manual 55 pages 15.82 Kb

MT5600BA-V92 specifications

Multi-Tech Systems MT5600BA-V92 is a versatile communication device designed for efficient data transmission over telephone lines. It is highly regarded for its reliability and performance in various applications, including point-of-sale transactions, remote monitoring, and data acquisition. One of the key features of the MT5600BA-V92 is its ability to operate at data rates of up to 56 Kbps. This high-speed modem ensures rapid data transfer, making it suitable for businesses that require quick and efficient communication.

The device supports V.92 technology, which enhances the performance of dial-up connections. V.92 provides features like cheaper call setup times, reduced latency, and improved upload speeds compared to older standards. This makes the MT5600BA-V92 an ideal choice for users who need enhanced data performance without investing in more complex networking infrastructure.

Another significant characteristic of the MT5600BA-V92 is its analog communication capabilities. The modem utilizes standard analog telephone lines for connectivity, allowing easy integration into existing telephony systems. This compatibility ensures that businesses can leverage their current infrastructure without needing substantial upgrades.

The MT5600BA-V92 integrates several features for improved functionality, including error correction and data compression technologies. These features enhance the reliability of data transmission by ensuring that lost or corrupted data packets are retransmitted, while compression reduces the amount of data sent over the line, further optimizing performance.

The modem is designed with user-friendliness in mind; it features a straightforward installation process and an intuitive configuration interface. Furthermore, it is compact and robust, making it suitable for diverse environments ranging from retail outlets to industrial applications.

The MT5600BA-V92 is also known for its durability and long life cycle, which is crucial for businesses that rely on continuous operations. Additionally, its ability to operate effectively in various conditions solidifies its position as a dependable communication solution.

In summary, the Multi-Tech Systems MT5600BA-V92 is an advanced modem that combines high-speed data transmission, analog compatibility, and robust error correction features. Its reliable performance and user-friendly design make it an excellent choice for businesses looking to enhance their communication capabilities while utilizing existing telephone infrastructure.