Multi-Tech Systems RAS96 manual E1 Daughter Card

5 E1 Daughter Card

A:\# e1setup 9b

Use settings from:

1.Use Active Settings (pre-configured card)

2.User System Defaults (new card)

3.User Stored Settings (swapping cards)

Enter Selection (q(uit), <1>): 3

1.Channel Polling Interval (Sec) : 20

2.Error Threshold : 10

3.Disconnect Timeout (sec) : 11

4.Framing Format: CRC4

5.Line Coding: Alternate Mark Inversion (AMI)

6.Signal Options : R2 MF

7.DNIS-digits (1-64 or 0 for auto): 0

8.Country Selection : ITU

9.Line Buildout : 120 Ohm

Enter Selection (-(previous), q(uit), d(one), <1>): 6

Signal Options

1.R2 Digital

2.R2 MF

Enter Selection (-(previous), <2>): -

1.Channel Polling Interval (Sec): 20

2.Error Threshold : 10

3.Disonnect Timeout (sec) : 11

4.Framing Format : CRC4

5.Line Coding : Alternate Mark Inversion (AMI)

6.Signal Options : R2 MF

7.DNIS - digits (1-64 or 0 for auto) : 0

8.Country Selection : ITU

9.Line Buildout : 120 Ohm

Enter Selection (-(previous), q(uit), d(one), <1>): 7

DNIS - digits (1-64 or 0 for auto) (-(previous), <0>): -

1.Channel Polling Interval (Sec) : 20

2.Error Threshold : 10

3.Disconnect Timeout (sec) : 11

4.Framing Format : CRC4

5.Line Coding : Alternate Mark Inversion (AMI)

6.Signal Options : R2 MF

7.DNIS-digits (1-64 or 0 for auto) : 0

8.Country Selection : ITU

9.Line Buildout : 120 Ohm

Enter Selection (-(previous), q(uit), d(one), <1>: 8

CommPlete Communications Server 51