Multi-Tech Systems RAS96 manual E1-EF

RAS96 RASCard User Guide

Code	Name	Description
43	Detect and Initialize	Initialize any serial and parallel ports (also game port).
	Serial and Parallel Ports
44	Reserved
45	Detect and Initialize	Initialize math coprocessor.
	Math Coprocessor
46–4D	Reserved
4E	Manufacturing POST	Reboot if Manufacturing POST Loop pin is set. Otherwise
	Loop or Display	display any messages (i.e., any non-fatal errors that were
	Messages	detected during POST) and enter Setup.
4F	Security Check	Ask password security (optional).
50	Write CMOS	Write all CMOS values back to RAM and clear screen.
51	Pre-Boot Enable	Enable parity checker. Enable NMI. Enable cache before
		boot.
52	Initialize Option ROMs	Initialize any option ROMs present from C8000h to EFFFFh.
		Note: When FSCAN option is enabled, will initialize from
		C8000h to F7FFFh.
53	Initialize Time Value	Initialize time value in 40h BIOS area.
60	Setup Virus Protect	Set up virus protect according to Setup
61	Set Boot Speed	Set system speed for boot
62	Setup NumLock	Set NumLock status according to Setup
63	Boot Attempt	Set low stack boot via INE19h.
B0	Spurious	If interrupt occurs in protected mode.
B1	Unclaimed NMI	If unmasked NMI occurs, display Press F1 to disable NMI,
		F2 reboot.
E1–EF	Setup Pages	E1, page 1; E2, page 2; etc.
FF	Boot

72 CommPlete Communications Server