Multi-Tech Systems manual Installing the MT5634ZLX/FE Card, MT5634ZLX/FE Installation

MultiMobile User Guide

Installing the MT5634ZLX/FE Card

To install your MT5634ZLX/FE (refer to Figure 2-4), perform the following steps:

1.Verify that your PC meets the system requirements in Chapter 1.

2.Insert the MT5634ZLX/FE card into the computer’s PCMCIA slot with the 68-pin connector facing the PCMCIA slot and the label facing up.

3.For DOS or NetWare client environments, run the menu-driven Install Utility; in other client environments, go to step 4.

4.Plug the 15-pin MODEM-LAM into the 15-pin Modem socket of the PC card; connect the other end of the MODEM-LAM to the telephone system (PSTN) by plugging an RJ-11 cable plug into the MODEM-LAM’s 6-pin RJ11 receptacle and plug the other end of the RJ11 cable into an available PSTN receptacle.

5.Plug the 15-pin Ethernet-LAM into the 15-pin Ethernet socket of the PC card; connect the other end (8-pin RJ-45) of the Ethernet-LAM to the Ethernet LAN using a UTP or STP cable.

6.With the PC powered on, verify MT5634ZLX/FE LED operation. Proceed to the Installing Driver and Modem Software section.

Notebook

	10/100Mst
PC	Fa	Ethernet
56K		LAN/Modem
	Card

÷

ö

Press here to release.

Keyed Connectors

OH: Off-Hook - Lights to indicate the unit wants to do something

CD: Carrier Detect - Lights when a valid carrier signal is detected

RD: Receive data - Flashes
when data is being received
TD: Transmit Data - Flashes
when data is being transmitted
Act	10/100	Link
Connect to PSTN
Telephone Line

Green

Acitivity: Blink

Green

Link Integrity: On

Received: Blink

Orange

100 Mbps: On

10 Mbps: Off

Connect to LAN

Figure 2-4. MT5634ZLX/FE Installation

14 MT5634ZLX/FE