Multi-Tech Systems MT5634ZLX/FE Artisoft Lantastic 6.0 Installation, Novell NetWare Installation

Page 29

Chapter 2 - Quick Start

Artisoft Lantastic 6.0 Installation

1.Install LANTASTIC 6.0.

2.Run INSTALL.EXE from the MT5634ZLX/FE driver disk root directory.

3.Select LANTASTIC 6.0 in Network Operating System screen, then Driver Install screen.

4.If current settings are correct, select Start Installation and go to step 6. Otherwise, select Modify Parameters to make changes.

5.Move the cursor to each field you want to modify, make modifications, click Enter to set the correct value, then click OK.

6.The Installation program starts copying drivers and modifying CONFIG.SYS, PROTOCOL.INI, and STARTNET.BAT.

7.Reboot the computer.

For Non-Windows 95/98/NT Systems

Insert the driver diskette into the floppy drive and set the current drive to the floppy drive (A:\). Then run INSTALL to install the dirver.

Novell NetWare Installation

Follow the steps bellow to complete the Novell Netware installations.

1.Run the installation program INSTALL.EXE from the Driver disk (for example, A:\INSTALL).

2.Select Netware 3.x and 4.x Workstation in the installation program dialog box.

3.Check the card settings. If current settings are correct, select Start Installation and go to step 5. Otherwise, select Modify Parameters to change settings.

4.Select the appropriate values then click Enter. When you are finished, click OK to exit.

5.The installation program starts installing drivers and modifying AUTOEXEC.BAT and

NET.CFG.

Select Yes then click Enter to modify the files. The installation is now complete.

6.Restart your computer to make NetWare connections.

To install the ODI driver manually, follow the instructions below:

1.Copy the file \NETWARE\LMODI.COM \NETWARE\NET.CFG and the file \ENABLER\LMVXD.386 from the driver disk to your local hard disk.

2.Use a text editor to edit the NET.CFG for setting the frame type. The frame type default is set to 802.3 for Netware 3.11 server and 802.2 for Netware 3.12 and 4.x servers. The frame type set in NET.CFG must match that set in Netware servers.

3.Use following format to create a startup batch file:

LSL

;Link Support Layer Module

 

;provided by Novell

LMODI

;Hardware Specific Module

IPXODI

;IPX Protocol Stack Module

 

;provided by Novell

NETx

;Shell Support Module provided by

 

;Novell

LOGIN

 

MT5634ZLX/FE

29

Image 29
Contents User Guide Revision Description User GuideContents Index Introduction and Description Product Description IntroductionFast Ethernet MultiMobile User GuideIntroduction and Description Auto-negotiationCategory 3 and Category 5 Ethernet Cabling Technical Specifications Features System Requirements Quick Start Unpacking Safety Warning TelecomQuick Start MT5634ZLX/FE LAM InformationMT5634ZLX/FE Installation Installing the MT5634ZLX/FE CardMODEM-LAM LEDs LED IndicatorsAct Ethernet LAM10/100 LinkWindows 98 Installation Installing Driver and Modem SoftwareMT5634ZLX/FE Add New Hardware Wizard dialog box is displayed Windows 95 Installation Quick Start MT5634ZLX/FE Installation in NT Windows NT 4.0 InstallationGetting Started with Windows NT Open My Computer Control Panel NetworkMT5634ZLX/FE Modem configuration for NT Quick Start MT5634ZLX/FE Getting Started with Windows NT3.51 Windows NT 3.51 InstallationOpen Program Manager Main group Control Panel Network Click StartupSelect Other Requires Disk from Manufacturer Click Continue Click Do not detect for the network adapterFor Non-Windows 95/98/NT Systems Artisoft Lantastic 6.0 InstallationNovell NetWare Installation PROTOCOL.INI MS LAN Manager InstallationSelect Enhanced mode NDIS3 for.... then click OK Packet Driver InstallationWindows for Workgroups 3.11 Installation Using the Windows 95/98/NT HyperTerminal Program Understanding AT CommandsBasic Modem Operation ATEnterDialing and Answering Techniques MT5634ZLX/FE AT Commands, S-Registers and Result Codes AT&K3H0Enter How To Use AT CommandsAT Commands, S-Registers, and Result Codes Basic AT Commands Speaker always on AT Commands, S-Registers, and Result Codes DSR always on MT5634ZLX/FE Terse Verbose Description Result CodesRegisters MT5634ZLX/FE Upstream data rates MT5634ZLX/FE Remote Configuration Changing the Setup Password Basic ProcedureSetup Changing the Remote Escape Character Remote ConfigurationMT5634ZLX/FE Troubleshooting Modem Does Not Auto-Answer the Phone Modem Goes Off-Hook and Disables the Telephone LineNo Text Appears on the Screen in Data Mode Troubleshooting Characters on the Screen Are DoubledNo Text Appears on the Screen When in Command Mode Modem Loses the Connection When in UseModem Does Not Connect with Another Modem Occasionally, the Modem Gives a Burst of ErrorsModem Gets Random Errors in Transmitted Data Installing The Win 95 Driver Over SystemSoft CardWorks TroubleshootingEnabling The MT5634ZLX/FE Select Properties Select Drivers in PropertiesWindows COM Port and IRQ ConflictsSelect Hkeylocalmachine Highlight the folder MultiMobile-MT5634ZLX-FE-XXXXAdditional References Troubleshooting WindowsWindows NT 3.51 and NT MultiMobile User Guide Appendices Industry Canada Appendix a Regulatory ComplianceClass B Statement FCC Part Appendices FCC Part 68 TelecomCanadian Limitations Notice FAX Branding StatementNew Zealand Telecom Warning Notice EMC, Safety and Terminal Directive ComplianceCommission Decision CTR21 Introduction TroubleshootingAppendix B V.90 Support Lmndisnif Drivername LMNDIS$ Appendix C Comprehensive Driver Notes IntroductionNDIS2 Driver for Windows for Workgroups ODI Driver for Workgroups Online Warranty Registration Appendix D Warranty, Service, and Technical SupportLimited Warranty Multi-Tech BBS Technical SupportIf you know the file name If you don’t know the file nameAbout the Internet About the MultiMobile SoftGSM Cellular UpgradeSupplyNet Online Ordering Instructions About Ordering AccessoriesAppendix E Uninstalling in Windows 95/98 Index IndexMultiMobileUSB User Guide