Multi-Tech Systems MT5634ZLX/FE manual NDIS2 Driver for Windows for Workgroups

Page 66

MultiMobile User Guide

Notes for Packet Driver

The following are examples of CONFIG.SYS file for loading System Soft? Card Services and packet driver.

Examples of partial CONFIG.SYS file:

device=c:\cardsoft\ss365sl.exe

device=c:\cardsoft\cs.exe device=c:\cardsoft\csalloc.exe c:\cardsoft\csalloc.ini device=c:\tcpip\carden.exe /iop=nnn /irq=n /com=n /mir=n device=c:\cardsoft\cardid.exe device=c:\tcpip\lmpd.com

Notes for Windows for Workgroups

After installation of the MT5634ZLX/FE card drivers, the system will automatically update both CONFIG.SYS and AUTOEXEC.BAT for you so that the driver will be loaded upon system start up. When modifying the two files, the system will make copies named CONFIG.ABO and AUTOEXEC.ABO in the system’s directory. If the driver of PC Card is not successfully loaded, replace the two *.ABO file for related file and try to start the system again.

The following are examples of CONFIG.SYS and AUTOEXEC.BAT for loading System Soft? Card Services and drivers for Windows for Workgroups:

Examples of CONFIG.SYS file:

device=c:\cardsoft\ss365sl.exe

device=c:\cardsoft\cs.exe device=c:\cardsoft\csalloc.exe c:\cardsoft\csalloc.ini device=c:\wfw311\carden.exe /iop=nnn /irq=n /com=n/mir=n device=c:\cardsoft\cardid.exe device=c:\wfw311\ifshlp.sys

Examples of AUTOEXEC.BAT file:

C:\WFW311\NETSTART

NDIS2 Driver for Windows for Workgroups

1.Run Windows for Workgroups and click the Network Setup icon in Network group.

2.In the Network Settings dialog box, click the Networks... button to select the network operating system.

3.In the Networks dialog box, check the radio button before Install Microsoft Windows Network and No Additional Network. Click OK to go back the Network Settings screen.

4.Click the Drivers... button to select network driver.

5.In the Network Drivers dialog box, click the Add Adapter... button to enter the Add Network Adapter dialog box. Select Unlisted or Updated Network Adapter then click OK.

6.Windows will prompt the Install Driver dialog box. At this time, put the driver diskette into floppy drive then click OK.

7.Select the Real mode NDIS2 for... string then click OK.

8.Follow Windows instructions to complete the installation and exit Windows.

9.Run INSTALL.EXE from root directory of driver diskette.

66

MT5634ZLX/FE

Image 66
Contents User Guide User Guide Revision DescriptionContents Index Introduction and Description Fast Ethernet IntroductionProduct Description MultiMobile User GuideAuto-negotiation Category 3 and Category 5 Ethernet CablingIntroduction and Description Technical Specifications Features System Requirements Quick Start Safety Warning Telecom UnpackingMT5634ZLX/FE LAM Information Quick StartInstalling the MT5634ZLX/FE Card MT5634ZLX/FE InstallationLED Indicators MODEM-LAM LEDs10/100 Ethernet LAMAct LinkInstalling Driver and Modem Software Windows 98 InstallationMT5634ZLX/FE Add New Hardware Wizard dialog box is displayed Windows 95 Installation Quick Start Getting Started with Windows NT Windows NT 4.0 InstallationMT5634ZLX/FE Installation in NT Open My Computer Control Panel NetworkMT5634ZLX/FE Modem configuration for NT Quick Start MT5634ZLX/FE Open Program Manager Main group Control Panel Network Windows NT 3.51 InstallationGetting Started with Windows NT3.51 Click StartupClick Do not detect for the network adapter Select Other Requires Disk from Manufacturer Click ContinueArtisoft Lantastic 6.0 Installation Novell NetWare InstallationFor Non-Windows 95/98/NT Systems MS LAN Manager Installation PROTOCOL.INIPacket Driver Installation Windows for Workgroups 3.11 InstallationSelect Enhanced mode NDIS3 for.... then click OK Basic Modem Operation Understanding AT CommandsUsing the Windows 95/98/NT HyperTerminal Program ATEnterDialing and Answering Techniques MT5634ZLX/FE AT Commands, S-Registers and Result Codes How To Use AT Commands AT&K3H0EnterAT Commands, S-Registers, and Result Codes Basic AT Commands Speaker always on AT Commands, S-Registers, and Result Codes DSR always on MT5634ZLX/FE Result Codes Terse Verbose DescriptionRegisters MT5634ZLX/FE Upstream data rates MT5634ZLX/FE Remote Configuration Basic Procedure SetupChanging the Setup Password Remote Configuration Changing the Remote Escape CharacterMT5634ZLX/FE Troubleshooting Modem Goes Off-Hook and Disables the Telephone Line Modem Does Not Auto-Answer the PhoneNo Text Appears on the Screen When in Command Mode Troubleshooting Characters on the Screen Are DoubledNo Text Appears on the Screen in Data Mode Modem Loses the Connection When in UseOccasionally, the Modem Gives a Burst of Errors Modem Gets Random Errors in Transmitted DataModem Does Not Connect with Another Modem Enabling The MT5634ZLX/FE TroubleshootingInstalling The Win 95 Driver Over SystemSoft CardWorks Select Properties Select Drivers in PropertiesSelect Hkeylocalmachine COM Port and IRQ ConflictsWindows Highlight the folder MultiMobile-MT5634ZLX-FE-XXXXTroubleshooting Windows Windows NT 3.51 and NTAdditional References MultiMobile User Guide Appendices Appendix a Regulatory Compliance Class B Statement FCC PartIndustry Canada FCC Part 68 Telecom AppendicesFAX Branding Statement Canadian Limitations NoticeEMC, Safety and Terminal Directive Compliance Commission Decision CTR21New Zealand Telecom Warning Notice Troubleshooting Appendix B V.90 SupportIntroduction Appendix C Comprehensive Driver Notes Introduction Lmndisnif Drivername LMNDIS$NDIS2 Driver for Windows for Workgroups ODI Driver for Workgroups Appendix D Warranty, Service, and Technical Support Limited WarrantyOnline Warranty Registration If you know the file name Technical SupportMulti-Tech BBS If you don’t know the file nameAbout the MultiMobile SoftGSM Cellular Upgrade About the InternetAbout Ordering Accessories SupplyNet Online Ordering InstructionsAppendix E Uninstalling in Windows 95/98 Index IndexMultiMobileUSB User Guide